- 密度 [g/cm3]: 1.01
- 斷裂伸長率 [%]: 28.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.01 g/cc | 0.0365 lb/in3 | ISO 1183-1 |
| Outgassing - Total Mass Loss | 0.14 % | 0.14 % | |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore D | 65 | 65 | |
| Ball Indentation Hardness | 55.0 MPa | 7980 psi | ISO 2039-1 |
| Tensile Strength | 23.0 MPa | 3340 psi | at Yield; ISO 527-1/-2 |
| Elongation at Break | 15 % | 15 % | ISO 527-1/-2 |
| Elongation at Yield | 8.0 % | 8.0 % | ISO 527-1/-2 |
| Tensile Modulus | 1.55 GPa | 225 ksi | ISO 527-1/-2 |
| Flexural Yield Strength | 28.0 MPa | 4060 psi | |
| Compressive Strength | 13.5 MPa @Strain 1 % | 1960 psi @Strain 1 % | ISO 604 |
| 20.5 MPa @Strain 2 % | 2970 psi @Strain 2 % | ISO 604 | |
| 28.5 MPa @Strain 5 % | 4130 psi @Strain 5 % | ISO 604 | |
| K Factor (ISO) | 150 μm/km | 150 μm/km | |
| Charpy Impact Unnotched | 2.50 J/cm2 | 11.9 ft-lb/in2 | ISO 179-1/1eU |
| Charpy Impact, Notched | 0.600 J/cm2 | 2.86 ft-lb/in2 | Complete Break; ISO 179-1/1eA |
| Coefficient of Friction, Dynamic | 0.15 - 0.30 | 0.15 - 0.30 | |
| Sand Slurry | 275 | 275 | |
| Limiting Pressure Velocity | 0.0500 MPa-m/sec | 1430 psi-ft/min | at 1 m/s unlubricated |
| 0.0800 MPa-m/sec | 2280 psi-ft/min | at 0.1 m/s unlubricated | |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | >= 1.0e+14 ohm-cm | >= 1.0e+14 ohm-cm | IEC 60093 |
| Surface Resistivity per Square | >= 1.0e+12 ohm | >= 1.0e+12 ohm | IEC 60093 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 140 μm/m-°C @Temperature 23.0 - 100 °C | 77.8 μin/in-°F @Temperature 73.4 - 212 °F | |
| Thermal Conductivity | 0.650 W/m-K | 4.51 BTU-in/hr-ft2-°F | |
| Melting Point | 135 °C | 275 °F | DSC, 10°C/min.; ISO 11357-1/-3 |
| Maximum Service Temperature, Air | 80.0 °C | 176 °F | Continuous |
| Deflection Temperature at 1.8 MPa (264 psi) | 45.0 °C | 113 °F | ISO 75-1/-2 |
| Flammability, UL94 | HB | HB | |
| Oxygen Index | <= 20 % | <= 20 % | ISO 4589-1/-2 |
| Compliance Properties | Metric | English | Comments |
| 3A-Dairy | No | No | |
| European Food 1935/2004 | No | No | |
| FDA | No | No | |
| USP Class VI | No | No | |
| Chemical Resistance Properties | Metric | English | Comments |
| Acids, Strong (pH 1-3) | Acceptable | Acceptable | |
| Acids, Weak | Acceptable | Acceptable | |
| Alcohols | Acceptable | Acceptable | |
| Alkalies, Strong (pH 11-14) | Acceptable | Acceptable | |
| Alkalies, Weak | Acceptable | Acceptable | |
| Chlorinated Solvents | Acceptable | Acceptable | |
| Continuous Sunlight | Limited | Limited | |
| Hot Water / Steam | Unacceptable | Unacceptable | |
| Hydrocarbons - Aliphatic | Acceptable | Acceptable | |
| Hydrocarbons - Aromatic | Limited | Limited | |
| Inorganic Salt Solutions | Acceptable | Acceptable | |
| Ketones, Esters | Acceptable | Acceptable | |