精品熟女少妇免费久久,久久人妻无码一区二区三区av,AV人摸人人人澡人人超碰,99久久久国产精品消防器材,精品国产色情一区二区三区

Overview of materials for Linear Low Density Polyethylene (LLDPE)/Octene, Film

Overview of materials for Linear Low Density Polyethylene (LLDPE)/Octene, Film 物性表: Overview of materials for Linear Low Density Polyethylene (LLDPE)/Octene, Film物性表及特性介紹,Overview of materials for Linear Low Density Polyethylene (LLDPE)/Octene, Film注塑參數(shù)詳情,如需Overview of materials for Linear Low Density Polyethylene (LLDPE)/Octene, Film下載, 可到相關下載區(qū)下載

熔體流動速率 [g/10min]: 0.65
密度 [g/cm3]: 0.916
脆化溫度 [℃]: -70.0
透光率 [%]: 90.0

Physical Properties	Metric	English	Comments

Density	0.916 - 0.925 g/cc	0.0331 - 0.0334 lb/in3	Average value: 0.920 g/cc Grade Count:34
Thickness	8.00 - 150 microns	0.315 - 5.91 mil	Average value: 33.9 microns Grade Count:20
Melt Flow	0.650 - 5.90 g/10 min	0.650 - 5.90 g/10 min	Average value: 1.22 g/10 min Grade Count:34

Mechanical Properties	Metric	English	Comments
Film Tensile Strength at Yield, MD	8.50 - 12.0 MPa	1230 - 1740 psi	Average value: 9.49 MPa Grade Count:28
Film Tensile Strength at Yield, TD	8.30 - 12.0 MPa	1200 - 1740 psi	Average value: 9.92 MPa Grade Count:28
Film Elongation at Break, MD	440 - 1220 %	440 - 1220 %	Average value: 633 % Grade Count:34
Film Elongation at Break, TD	647 - 1570 %	647 - 1570 %	Average value: 859 % Grade Count:34
Secant Modulus, MD	0.116 - 0.230 GPa	16.8 - 33.4 ksi	Average value: 0.171 GPa Grade Count:33
Secant Modulus, TD	0.132 - 0.270 GPa	19.1 - 39.2 ksi	Average value: 0.189 GPa Grade Count:33
Coefficient of Friction	0.110 - 1.00	0.110 - 1.00	Average value: 0.438 Grade Count:16
Elmendorf Tear Strength MD	140 - 1210 g	140 - 1210 g	Average value: 353 g Grade Count:18
Elmendorf Tear Strength TD	422 - 1350 g	422 - 1350 g	Average value: 620 g Grade Count:18
Elmendorf Tear Strength, MD	5.60 - 24.0 g/micron	142 - 610 g/mil	Average value: 14.2 g/micron Grade Count:34
Elmendorf Tear Strength, TD	16.9 - 31.2 g/micron	429 - 792 g/mil	Average value: 23.3 g/micron Grade Count:34
Dart Drop	4.50 - 29.0 g/micron	114 - 737 g/mil	Average value: 10.5 g/micron Grade Count:20
Dart drop Test	90.0 - 909 g	0.198 - 2.00 lb	Average value: 336 g Grade Count:24
Film Tensile Strength at Break, MD	28.3 - 61.0 MPa	4100 - 8850 psi	Average value: 46.2 MPa Grade Count:34
Film Tensile Strength at Break, TD	21.0 - 48.0 MPa	3050 - 6960 psi	Average value: 38.8 MPa Grade Count:34
Heat Seal Strength Initiation Temperature	100 °C	212 °F	Average value: 100 °C Grade Count:3

Thermal Properties	Metric	English	Comments
Melting Point	117 - 123 °C	243 - 253 °F	Average value: 120 °C Grade Count:8
Vicat Softening Point	95.0 - 110 °C	203 - 230 °F	Average value: 103 °C Grade Count:10
Brittleness Temperature	-70.0 °C	-94.0 °F	Average value: -70.0 °C Grade Count:9

Optical Properties	Metric	English	Comments
Haze	0.500 - 34.0 %	0.500 - 34.0 %	Average value: 10.2 % Grade Count:32
Gloss	33.0 - 121 %	33.0 - 121 %	Average value: 68.7 % Grade Count:32
Transmission, Visible	90.0 %	90.0 %	Average value: 90.0 % Grade Count:8

Processing Properties	Metric	English	Comments
Melt Temperature	180 - 230 °C	356 - 446 °F	Average value: 213 °C Grade Count:12
Die Opening	0.0889 - 0.216 cm	0.0350 - 0.0850 in	Average value: 0.151 cm Grade Count:4
Blow-up Ratio (BUR)	2.00 - 3.50	2.00 - 3.50	Average value: 2.67 Grade Count:3

關鍵詞:
供應
Film
LLDPE
Overview of materials for Linear Low Density Polyethylene (LLDPE)/Octene

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/yuanliaoku/show-39789.html

免責聲明: 本文 Overview of materials for Linear Low Density Polyethylene (LLDPE)/Octene, Film 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網(wǎng)所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯(lián)絡

該類別其他物性信息