- 密度 [g/cm3]: 1.59
- 吸水率 [%]: 0.04
- 缺口沖擊強(qiáng)度: 0.66
- 斷裂伸長率 [%]: 205.5
- 彎曲強(qiáng)度 [MPa]: 127.5
- 彎曲模量 [MPa]: 10.03
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.59 g/cc | 0.0574 lb/in3 | ASTM D792 |
| Water Absorption | 0.040 % | 0.040 % | ASTM D570 |
| Linear Mold Shrinkage | 0.00050 cm/cm | 0.00050 in/in | ATM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 21 | 21 | ASTM D785 |
| Tensile Strength, Ultimate | 127.5 MPa | 18490 psi | ASTM D638 |
| Elongation at Break | 1.41 % | 1.41 % | ASTM D638 |
| Tensile Modulus | 11.93 GPa | 1730 ksi | ASTM D638 |
| Flexural Yield Strength | 205.5 MPa | 29810 psi | ASTM D790 |
| Flexural Modulus | 10.03 GPa | 1455 ksi | ASTM D790 |
| Compressive Yield Strength | 175.7 MPa | 25480 psi | ASTM D695 |
| Izod Impact, Notched | 0.660 J/cm | 1.24 ft-lb/in | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 2.695e+16 ohm-cm | 2.695e+16 ohm-cm | ASTM D257 |
| Dielectric Constant | 3.2 @Frequency 1e+6 Hz | 3.2 @Frequency 1e+6 Hz | ASTM D150 |
| Dielectric Strength | 16.4 kV/mm | 417 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.012 @Frequency 1e+6 Hz | 0.012 @Frequency 1e+6 Hz | ASTM D150 |
| Arc Resistance | 70 sec | 70 sec | ASTM D495 |
| Comparative Tracking Index | 225 V | 225 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 1.8 MPa (264 psi) | 221 °C | 430 °F | ASTM D648 |
| Flammability, UL94 | HB @Thickness 1.47 mm | HB @Thickness 0.0579 in | |
- 關(guān)鍵詞:
- PET
- black
- 供應(yīng)
- Injection Molded
- Pellet
- Plenco 51030 PET