- 密度 [g/cm3]: 1.31
- 缺口沖擊強(qiáng)度: 0.59
- 拉伸強(qiáng)度 [MPa]: 53.0
- 斷裂伸長率 [%]: 74.0
- 彎曲強(qiáng)度 [MPa]: 26.0
- 彎曲模量 [MPa]: 2.34
- 硬度: 105.0
- 熱變形溫度 [℃]: 68.0
- 透光率 [%]: 89.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.31 g/cc | 0.0473 lb/in3 | ASTM D792 |
| Linear Mold Shrinkage, Flow | 0.0050 cm/cm @Thickness 3.20 mm | 0.0050 in/in @Thickness 0.126 in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell R | 105 | 105 | ASTM D785 |
| Tensile Strength, Ultimate | 26.0 MPa | 3770 psi | ASTM D638 |
| 26.0 MPa | 3770 psi | ISO 527 | |
| Tensile Strength, Yield | 53.0 MPa | 7690 psi | ASTM D638 |
| 54.0 MPa | 7830 psi | ISO 527 | |
| Elongation at Break | 61 % | 61 % | ISO 527 |
| Elongation at Yield | 4.0 % | 4.0 % | ISO 527 |
| Tensile Modulus | 2.02 GPa | 293 ksi | ISO 527 |
| Flexural Yield Strength | 74.0 MPa | 10700 psi | ISO 178 |
| 77.0 MPa | 11200 psi | ASTM D790 | |
| Flexural Modulus | 2.34 GPa | 339 ksi | ISO 178 |
| Izod Impact, Notched | 0.590 J/cm | 1.11 ft-lb/in | ASTM D256 |
| 0.290 J/cm @Temperature -40.0 °C | 0.543 ft-lb/in @Temperature -40.0 °F | ASTM D256 | |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 0.46 MPa (66 psi) | 68.0 °C | 154 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 61.0 °C | 142 °F | ASTM D648 |
| Optical Properties | Metric | English | Comments |
| Haze | 0.50 % | 0.50 % | ASTM D1003 |
| Transmission, Visible | 89 % | 89 % | Regular transmittance per ASTM D 1003 |
| 91 % | 91 % | Total Transmittance; ASTM D 1003 | |
| Processing Properties | Metric | English | Comments |
| Melt Temperature | 282 °C | 540 °F | |
| Mold Temperature | 27.0 °C | 80.6 °F | |
| Drying Temperature | 102 °C | 216 °F | |
| Dry Time | 4 hour | 4 hour | |