- 吸水率 [%]: 0.15
- 缺口沖擊強度: 0.91
- 拉伸強度 [MPa]: 50.0
- 彎曲模量 [MPa]: 2.10
- 熱變形溫度 [℃]: 90.0
- 透光率 [%]: 86.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.20 g/cc | 1.20 g/cc | ASTM D792 |
| Water Absorption | 0.15 % | 0.15 % | 24h Immersion; ASTM D570 |
| Linear Mold Shrinkage | 0.0050 - 0.0070 cm/cm | 0.0050 - 0.0070 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength at Break | 56.0 MPa | 8120 psi | ASTM D638 |
| Tensile Strength, Yield | 50.0 MPa | 7250 psi | ASTM D638 |
| Elongation at Break | 195 % | 195 % | ASTM D638 |
| Elongation at Yield | 5.5 % | 5.5 % | ASTM D638 |
| Flexural Strength | 76.0 MPa | 11000 psi | ASTM D790 |
| Flexural Modulus | 2.10 GPa | 305 ksi | ASTM D790 |
| Izod Impact, Notched | 0.910 J/cm @Temperature -40.0 °C | 1.70 ft-lb/in @Temperature -40.0 °F | ASTM D256 |
| NB @Temperature 23.0 °C | NB @Temperature 73.4 °F | ASTM D256 | |
| Izod Impact, Unnotched | NB | NB | ASTM D4812 |
| NB @Temperature -40.0 °C | NB @Temperature -40.0 °F | ASTM D4812 | |
| Puncture Energy | 49.0 J | 36.1 ft-lb | Puncture Resistance @Max Load, -40°C; ASTM D3763 |
| 55.0 J | 40.6 ft-lb | Puncture Resistance @Max Load, 23°C; ASTM D3763 | |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 0.46 MPa (66 psi) | 90.0 °C | 194 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 77.0 °C | 171 °F | ASTM D648 |
| Optical Properties | Metric | English | Comments |
| Haze | 0.50 % | 0.50 % | ASTM D1003 |
| Transmission, Visible | 86 % | 86 % | Total Transmittance; ASTM D1003 |
| Processing Properties | Metric | English | Comments |
| Melt Temperature | 266 - 288 °C | 511 - 550 °F | |
| Mold Temperature | 27.0 - 60.0 °C | 80.6 - 140 °F | |
| Drying Temperature | 88.0 °C | 190 °F | |
| Dry Time | 4 - 6 hour | 4 - 6 hour | |