• <samp id="w83am"><delect id="w83am"></delect></samp>
        2. 

        <strong id="w83am"></strong>
        <bdo id="w83am"></bdo>
        

        
日本亚洲欧洲无免费码在线,亚洲婷婷六月的婷婷,亚洲精品国产综合久久一线,国产精品香港三级国产av,国模粉嫩小泬视频在线观看,h动态图男女啪啪27报gif,猫咪社区免费资源在线观看,亚洲国产精品成人av网 


    

    
    
        
        
          
            
        1. 首頁
          2. 
            
        2. 英文物性
          3. 
            
        3. PET
          4. 
            
        4. DuPont Performance Polymers Rynite? 408 NC010 PET
          5. 
        
        
        
        
            
        


                
        

                
        DuPont Performance Polymers Rynite? 408 NC010 PET
        
                
        DuPont Performance Polymers Rynite? 408 NC010 PET 物性表: DuPont Performance Polymers Rynite? 408 NC010 PET物性表及特性介紹,DuPont Performance Polymers Rynite? 408 NC010 PET注塑參數詳情,如需DuPont Performance Polymers Rynite? 408 NC010 PET下載, 可到相關下載區下載
        

                
        
                    
        
                        
        

                            
          
                                
                                
        • 密度 [g/cm3]: 1.49
          • 
                                
                                
        • 吸水率 [%]: 0.06
          • 
                                
                                
        • 成型收縮率 [%]: 0.002
          • 
                                
                                
        • 缺口沖擊強度: 1.01
          • 
                                
                                
        • 彎曲模量 [MPa]: 2.25
          • 
                                
                                
        • 硬度: 115.0
          • 
                                
                                
        • 熱變形溫度 [℃]: 237.0
          • 
                                
                            
        

                            
         
        Physical PropertiesMetricEnglishComments
        Specific Gravity 1.51 g/cc1.51 g/ccASTM D792
        

        Density 1.49 g/cc0.0538 lb/in3ISO 1183
        

        Filler Content 30 %30 %
        

        Water Absorption 0.060 %
        @Temperature 23.0 °C        		0.060 %
        @Temperature 73.4 °F        		50%RH,23°C,24h; ASTM D570
        

        Viscosity  110000 cP
        @Shear Rate 3090 1/s,
         Temperature 305 °C        		110000 cP
        @Shear Rate 3090 1/s,
         Temperature 581 °F        		ISO 11443
        

         138000 cP
        @Shear Rate 3090 1/s,
         Temperature 290 °C        		138000 cP
        @Shear Rate 3090 1/s,
         Temperature 554 °F        		ISO 11443
        

         157000 cP
        @Shear Rate 1450 1/s,
         Temperature 305 °C        		157000 cP
        @Shear Rate 1450 1/s,
         Temperature 581 °F        		ISO 11443
        

         172000 cP
        @Shear Rate 3090 1/s,
         Temperature 275 °C        		172000 cP
        @Shear Rate 3090 1/s,
         Temperature 527 °F        		ISO 11443
        

         215000 cP
        @Shear Rate 1450 1/s,
         Temperature 290 °C        		215000 cP
        @Shear Rate 1450 1/s,
         Temperature 554 °F        		ISO 11443
        

         218000 cP
        @Shear Rate 681 1/s,
         Temperature 305 °C        		218000 cP
        @Shear Rate 681 1/s,
         Temperature 581 °F        		ISO 11443
        

         260000 cP
        @Shear Rate 1450 1/s,
         Temperature 275 °C        		260000 cP
        @Shear Rate 1450 1/s,
         Temperature 527 °F        		ISO 11443
        

         318000 cP
        @Shear Rate 681 1/s,
         Temperature 290 °C        		318000 cP
        @Shear Rate 681 1/s,
         Temperature 554 °F        		ISO 11443
        

         322000 cP
        @Shear Rate 316 1/s,
         Temperature 305 °C        		322000 cP
        @Shear Rate 316 1/s,
         Temperature 581 °F        		ISO 11443
        

         386000 cP
        @Shear Rate 681 1/s,
         Temperature 275 °C        		386000 cP
        @Shear Rate 681 1/s,
         Temperature 527 °F        		ISO 11443
        

         454000 cP
        @Shear Rate 316 1/s,
         Temperature 290 °C        		454000 cP
        @Shear Rate 316 1/s,
         Temperature 554 °F        		ISO 11443
        

         463000 cP
        @Shear Rate 146 1/s,
         Temperature 305 °C        		463000 cP
        @Shear Rate 146 1/s,
         Temperature 581 °F        		ISO 11443
        

         560000 cP
        @Shear Rate 316 1/s,
         Temperature 275 °C        		560000 cP
        @Shear Rate 316 1/s,
         Temperature 527 °F        		ISO 11443
        

         655000 cP
        @Shear Rate 146 1/s,
         Temperature 290 °C        		655000 cP
        @Shear Rate 146 1/s,
         Temperature 554 °F        		ISO 11443
        

         663000 cP
        @Shear Rate 73.0 1/s,
         Temperature 305 °C        		663000 cP
        @Shear Rate 73.0 1/s,
         Temperature 581 °F        		ISO 11443
        

         810000 cP
        @Shear Rate 146 1/s,
         Temperature 275 °C        		810000 cP
        @Shear Rate 146 1/s,
         Temperature 527 °F        		ISO 11443
        

         935000 cP
        @Shear Rate 73.0 1/s,
         Temperature 290 °C        		935000 cP
        @Shear Rate 73.0 1/s,
         Temperature 554 °F        		ISO 11443
        

         1.00e+6 cP
        @Shear Rate 36.0 1/s,
         Temperature 305 °C        		1.00e+6 cP
        @Shear Rate 36.0 1/s,
         Temperature 581 °F        		ISO 11443
        

         1.17e+6 cP
        @Shear Rate 73.0 1/s,
         Temperature 275 °C        		1.17e+6 cP
        @Shear Rate 73.0 1/s,
         Temperature 527 °F        		ISO 11443
        

         1.29e+6 cP
        @Shear Rate 36.0 1/s,
         Temperature 290 °C        		1.29e+6 cP
        @Shear Rate 36.0 1/s,
         Temperature 554 °F        		ISO 11443
        

         1.62e+6 cP
        @Shear Rate 36.0 1/s,
         Temperature 275 °C        		1.62e+6 cP
        @Shear Rate 36.0 1/s,
         Temperature 527 °F        		ISO 11443
        

         1.73e+6 cP
        @Shear Rate 12.0 1/s,
         Temperature 305 °C        		1.73e+6 cP
        @Shear Rate 12.0 1/s,
         Temperature 581 °F        		ISO 11443
        

         1.97e+6 cP
        @Shear Rate 7.30 1/s,
         Temperature 305 °C        		1.97e+6 cP
        @Shear Rate 7.30 1/s,
         Temperature 581 °F        		ISO 11443
        

         2.55e+6 cP
        @Shear Rate 12.0 1/s,
         Temperature 290 °C        		2.55e+6 cP
        @Shear Rate 12.0 1/s,
         Temperature 554 °F        		ISO 11443
        

         2.96e+6 cP
        @Shear Rate 12.0 1/s,
         Temperature 275 °C        		2.96e+6 cP
        @Shear Rate 12.0 1/s,
         Temperature 527 °F        		ISO 11443
        

         3.33e+6 cP
        @Shear Rate 7.30 1/s,
         Temperature 290 °C        		3.33e+6 cP
        @Shear Rate 7.30 1/s,
         Temperature 554 °F        		ISO 11443
        

         4.11e+6 cP
        @Shear Rate 7.30 1/s,
         Temperature 275 °C        		4.11e+6 cP
        @Shear Rate 7.30 1/s,
         Temperature 527 °F        		ISO 11443
        

        Linear Mold Shrinkage  0.0020 cm/cm
        @Thickness 3.20 mm        		0.0020 in/in
        @Thickness 0.126 in        		Flow
        

         0.0021 cm/cm
        @Thickness 1.60 mm        		0.0021 in/in
        @Thickness 0.0630 in        		Flow
        

         0.0063 cm/cm
        @Thickness 1.60 mm        		0.0063 in/in
        @Thickness 0.0630 in        		Transverse
        

         0.0075 cm/cm
        @Thickness 3.20 mm        		0.0075 in/in
        @Thickness 0.126 in        		Transverse
        

        Linear Mold Shrinkage, Flow 0.0035 cm/cm0.0035 in/inParallel; Annealed; ISO 294-4
        

         0.0025 cm/cm
        @Thickness 2.00 mm        		0.0025 in/in
        @Thickness 0.0787 in        		Parallel; ISO 294-4
        

        Linear Mold Shrinkage, Transverse 0.0105 cm/cm0.0105 in/inNormal; Annealed; ISO 294-4
        

         0.0085 cm/cm
        @Thickness 2.00 mm        		0.0085 in/in
        @Thickness 0.0787 in        		Normal; ISO 294-4
        

        Melt Index of Compound 5.5 g/10 min
        @Load 5.00 kg,
         Temperature 280 °C        		5.5 g/10 min
        @Load 11.0 lb,
         Temperature 536 °F        		cm3/10 min; ISO 1133
        

         
        Mechanical PropertiesMetricEnglishComments
        Hardness, Rockwell M 7070ASTM D785
        

         7070ISO 2039/2
        

        Hardness, Rockwell R 115115ASTM D785
        

         115115ISO 2039/2
        

        Tensile Strength at Break 125 MPa
        @Temperature 23.0 °C        		18100 psi
        @Temperature 73.4 °F        		ISO 527
        

        Tensile Strength  55.2 MPa
        @Temperature 150 °C        		8010 psi
        @Temperature 302 °F        		ASTM D638
        

         70.3 MPa
        @Temperature 90.0 °C        		10200 psi
        @Temperature 194 °F        		ASTM D638
        

         126 MPa
        @Temperature 23.0 °C        		18300 psi
        @Temperature 73.4 °F        		ASTM D638
        

         206 MPa
        @Temperature -40.0 °C        		29900 psi
        @Temperature -40.0 °F        		ASTM D638
        

        Tensile Stress  20.5 MPa
        @Strain 1.05 %,
         Temperature 150 °C        		2970 psi
        @Strain 1.05 %,
         Temperature 302 °F        		ISO 527
        

         23.5 MPa
        @Strain 0.960 %,
         Temperature 120 °C        		3410 psi
        @Strain 0.960 %,
         Temperature 248 °F        		ISO 527
        

         23.5 MPa
        @Strain 0.230 %,
         Temperature 0.000 °C        		3410 psi
        @Strain 0.230 %,
         Temperature 32.0 °F        		ISO 527
        

         24.5 MPa
        @Strain 0.260 %,
         Temperature 40.0 °C        		3550 psi
        @Strain 0.260 %,
         Temperature 104 °F        		ISO 527
        

         25.6 MPa
        @Strain 0.240 %,
         Temperature -40.0 °C        		3710 psi
        @Strain 0.240 %,
         Temperature -40.0 °F        		ISO 527
        

         28.8 MPa
        @Strain 0.960 %,
         Temperature 90.0 °C        		4180 psi
        @Strain 0.960 %,
         Temperature 194 °F        		ISO 527
        

         30.4 MPa
        @Strain 2.10 %,
         Temperature 150 °C        		4410 psi
        @Strain 2.10 %,
         Temperature 302 °F        		ISO 527
        

         35.2 MPa
        @Strain 0.600 %,
         Temperature 60.0 °C        		5110 psi
        @Strain 0.600 %,
         Temperature 140 °F        		ISO 527
        

         35.9 MPa
        @Strain 1.92 %,
         Temperature 120 °C        		5210 psi
        @Strain 1.92 %,
         Temperature 248 °F        		ISO 527
        

         36.1 MPa
        @Strain 3.16 %,
         Temperature 150 °C        		5240 psi
        @Strain 3.16 %,
         Temperature 302 °F        		ISO 527
        

         40.4 MPa
        @Strain 4.21 %,
         Temperature 150 °C        		5860 psi
        @Strain 4.21 %,
         Temperature 302 °F        		ISO 527
        

         42.7 MPa
        @Strain 2.88 %,
         Temperature 120 °C        		6190 psi
        @Strain 2.88 %,
         Temperature 248 °F        		ISO 527
        

         44.0 MPa
        @Strain 5.27 %,
         Temperature 150 °C        		6380 psi
        @Strain 5.27 %,
         Temperature 302 °F        		ISO 527
        

         44.9 MPa
        @Strain 0.460 %,
         Temperature 0.000 °C        		6510 psi
        @Strain 0.460 %,
         Temperature 32.0 °F        		ISO 527
        

         45.0 MPa
        @Strain 1.92 %,
         Temperature 90.0 °C        		6530 psi
        @Strain 1.92 %,
         Temperature 194 °F        		ISO 527
        

         45.2 MPa
        @Strain 0.530 %,
         Temperature 40.0 °C        		6560 psi
        @Strain 0.530 %,
         Temperature 104 °F        		ISO 527
        

         46.8 MPa
        @Strain 6.32 %,
         Temperature 150 °C        		6790 psi
        @Strain 6.32 %,
         Temperature 302 °F        		ISO 527
        

         47.5 MPa
        @Strain 3.84 %,
         Temperature 120 °C        		6890 psi
        @Strain 3.84 %,
         Temperature 248 °F        		ISO 527
        

         49.4 MPa
        @Strain 7.37 %,
         Temperature 150 °C        		7160 psi
        @Strain 7.37 %,
         Temperature 302 °F        		ISO 527
        

         49.5 MPa
        @Strain 0.480 %,
         Temperature -40.0 °C        		7180 psi
        @Strain 0.480 %,
         Temperature -40.0 °F        		ISO 527
        

         51.3 MPa
        @Strain 4.81 %,
         Temperature 120 °C        		7440 psi
        @Strain 4.81 %,
         Temperature 248 °F        		ISO 527
        

         51.4 MPa
        @Strain 8.43 %,
         Temperature 150 °C        		7450 psi
        @Strain 8.43 %,
         Temperature 302 °F        		ISO 527
        

         53.0 MPa
        @Strain 9.49 %,
         Temperature 150 °C        		7690 psi
        @Strain 9.49 %,
         Temperature 302 °F        		ISO 527
        

         53.6 MPa
        @Strain 2.88 %,
         Temperature 90.0 °C        		7770 psi
        @Strain 2.88 %,
         Temperature 194 °F        		ISO 527
        

         54.2 MPa
        @Strain 5.77 %,
         Temperature 120 °C        		7860 psi
        @Strain 5.77 %,
         Temperature 248 °F        		ISO 527
        

         54.5 MPa
        @Strain 10.5 %,
         Temperature 150 °C        		7900 psi
        @Strain 10.5 %,
         Temperature 302 °F        		ISO 527
        

         56.5 MPa
        @Strain 6.73 %,
         Temperature 120 °C        		8190 psi
        @Strain 6.73 %,
         Temperature 248 °F        		ISO 527
        

         58.3 MPa
        @Strain 7.69 %,
         Temperature 120 °C        		8460 psi
        @Strain 7.69 %,
         Temperature 248 °F        		ISO 527
        

         58.4 MPa
        @Strain 1.20 %,
         Temperature 60.0 °C        		8470 psi
        @Strain 1.20 %,
         Temperature 140 °F        		ISO 527
        

         59.5 MPa
        @Strain 3.84 %,
         Temperature 90.0 °C        		8630 psi
        @Strain 3.84 %,
         Temperature 194 °F        		ISO 527
        

         59.6 MPa
        @Strain 8.65 %,
         Temperature 120 °C        		8640 psi
        @Strain 8.65 %,
         Temperature 248 °F        		ISO 527
        

         60.7 MPa
        @Strain 9.61 %,
         Temperature 120 °C        		8800 psi
        @Strain 9.61 %,
         Temperature 248 °F        		ISO 527
        

         63.2 MPa
        @Strain 0.790 %,
         Temperature 40.0 °C        		9170 psi
        @Strain 0.790 %,
         Temperature 104 °F        		ISO 527
        

         63.3 MPa
        @Strain 4.81 %,
         Temperature 90.0 °C        		9180 psi
        @Strain 4.81 %,
         Temperature 194 °F        		ISO 527
        

         63.9 MPa
        @Strain 0.680 %,
         Temperature 0.000 °C        		9270 psi
        @Strain 0.680 %,
         Temperature 32.0 °F        		ISO 527
        

         66.1 MPa
        @Strain 5.77 %,
         Temperature 90.0 °C        		9590 psi
        @Strain 5.77 %,
         Temperature 194 °F        		ISO 527
        

         68.1 MPa
        @Strain 6.73 %,
         Temperature 90.0 °C        		9880 psi
        @Strain 6.73 %,
         Temperature 194 °F        		ISO 527
        

         69.6 MPa
        @Strain 7.69 %,
         Temperature 90.0 °C        		10100 psi
        @Strain 7.69 %,
         Temperature 194 °F        		ISO 527
        

         70.6 MPa
        @Strain 8.65 %,
         Temperature 90.0 °C        		10200 psi
        @Strain 8.65 %,
         Temperature 194 °F        		ISO 527
        

         71.3 MPa
        @Strain 9.61 %,
         Temperature 90.0 °C        		10300 psi
        @Strain 9.61 %,
         Temperature 194 °F        		ISO 527
        

         72.1 MPa
        @Strain 1.81 %,
         Temperature 60.0 °C        		10500 psi
        @Strain 1.81 %,
         Temperature 140 °F        		ISO 527
        

         72.4 MPa
        @Strain 0.720 %,
         Temperature -40.0 °C        		10500 psi
        @Strain 0.720 %,
         Temperature -40.0 °F        		ISO 527
        

         77.2 MPa
        @Strain 1.05 %,
         Temperature 40.0 °C        		11200 psi
        @Strain 1.05 %,
         Temperature 104 °F        		ISO 527
        

         79.2 MPa
        @Strain 2.41 %,
         Temperature 60.0 °C        		11500 psi
        @Strain 2.41 %,
         Temperature 140 °F        		ISO 527
        

         81.3 MPa
        @Strain 0.910 %,
         Temperature 0.000 °C        		11800 psi
        @Strain 0.910 %,
         Temperature 32.0 °F        		ISO 527
        

         83.0 MPa
        @Strain 3.01 %,
         Temperature 60.0 °C        		12000 psi
        @Strain 3.01 %,
         Temperature 140 °F        		ISO 527
        

         84.6 MPa
        @Strain 3.61 %,
         Temperature 60.0 °C        		12300 psi
        @Strain 3.61 %,
         Temperature 140 °F        		ISO 527
        

         85.8 MPa
        @Strain 4.21 %,
         Temperature 60.0 °C        		12400 psi
        @Strain 4.21 %,
         Temperature 140 °F        		ISO 527
        

         86.5 MPa
        @Strain 4.81 %,
         Temperature 60.0 °C        		12500 psi
        @Strain 4.81 %,
         Temperature 140 °F        		ISO 527
        

         86.8 MPa
        @Strain 5.41 %,
         Temperature 60.0 °C        		12600 psi
        @Strain 5.41 %,
         Temperature 140 °F        		ISO 527
        

         87.2 MPa
        @Strain 6.02 %,
         Temperature 60.0 °C        		12600 psi
        @Strain 6.02 %,
         Temperature 140 °F        		ISO 527
        

         87.8 MPa
        @Strain 1.32 %,
         Temperature 40.0 °C        		12700 psi
        @Strain 1.32 %,
         Temperature 104 °F        		ISO 527
        

         93.0 MPa
        @Strain 0.960 %,
         Temperature -40.0 °C        		13500 psi
        @Strain 0.960 %,
         Temperature -40.0 °F        		ISO 527
        

         95.5 MPa
        @Strain 1.58 %,
         Temperature 40.0 °C        		13900 psi
        @Strain 1.58 %,
         Temperature 104 °F        		ISO 527
        

         96.6 MPa
        @Strain 1.14 %,
         Temperature 0.000 °C        		14000 psi
        @Strain 1.14 %,
         Temperature 32.0 °F        		ISO 527
        

         101 MPa
        @Strain 1.84 %,
         Temperature 40.0 °C        		14600 psi
        @Strain 1.84 %,
         Temperature 104 °F        		ISO 527
        

         104 MPa
        @Strain 2.11 %,
         Temperature 40.0 °C        		15100 psi
        @Strain 2.11 %,
         Temperature 104 °F        		ISO 527
        

         106 MPa
        @Strain 2.37 %,
         Temperature 40.0 °C        		15400 psi
        @Strain 2.37 %,
         Temperature 104 °F        		ISO 527
        

         107 MPa
        @Strain 2.63 %,
         Temperature 40.0 °C        		15500 psi
        @Strain 2.63 %,
         Temperature 104 °F        		ISO 527
        

         109 MPa
        @Strain 1.37 %,
         Temperature 0.000 °C        		15800 psi
        @Strain 1.37 %,
         Temperature 32.0 °F        		ISO 527
        

         112 MPa
        @Strain 1.20 %,
         Temperature -40.0 °C        		16200 psi
        @Strain 1.20 %,
         Temperature -40.0 °F        		ISO 527
        

         120 MPa
        @Strain 1.60 %,
         Temperature 0.000 °C        		17400 psi
        @Strain 1.60 %,
         Temperature 32.0 °F        		ISO 527
        

         129 MPa
        @Strain 1.83 %,
         Temperature 0.000 °C        		18700 psi
        @Strain 1.83 %,
         Temperature 32.0 °F        		ISO 527
        

         130 MPa
        @Strain 1.44 %,
         Temperature -40.0 °C        		18900 psi
        @Strain 1.44 %,
         Temperature -40.0 °F        		ISO 527
        

         136 MPa
        @Strain 2.05 %,
         Temperature 0.000 °C        		19700 psi
        @Strain 2.05 %,
         Temperature 32.0 °F        		ISO 527
        

         142 MPa
        @Strain 2.28 %,
         Temperature 0.000 °C        		20600 psi
        @Strain 2.28 %,
         Temperature 32.0 °F        		ISO 527
        

         146 MPa
        @Strain 1.69 %,
         Temperature -40.0 °C        		21200 psi
        @Strain 1.69 %,
         Temperature -40.0 °F        		ISO 527
        

         160 MPa
        @Strain 1.93 %,
         Temperature -40.0 °C        		23200 psi
        @Strain 1.93 %,
         Temperature -40.0 °F        		ISO 527
        

         172 MPa
        @Strain 2.17 %,
         Temperature -40.0 °C        		24900 psi
        @Strain 2.17 %,
         Temperature -40.0 °F        		ISO 527
        

         184 MPa
        @Strain 2.41 %,
         Temperature -40.0 °C        		26700 psi
        @Strain 2.41 %,
         Temperature -40.0 °F        		ISO 527
        

        Elongation at Break  3.0 %
        @Temperature -40.0 °C        		3.0 %
        @Temperature -40.0 °F        		ASTM D638
        

         3.3 %
        @Temperature 23.0 °C        		3.3 %
        @Temperature 73.4 °F        		ASTM D638
        

         3.3 %
        @Temperature 23.0 °C        		3.3 %
        @Temperature 73.4 °F        		ISO 527
        

         7.0 %
        @Temperature 90.0 °C        		7.0 %
        @Temperature 194 °F        		ASTM D638
        

         7.5 %
        @Temperature 150 °C        		7.5 %
        @Temperature 302 °F        		ASTM D638
        

        Tensile Modulus  2.70 GPa
        @Temperature 150 °C        		392 ksi
        @Temperature 302 °F        		ASTM D638
        

         3.28 GPa
        @Temperature 90.0 °C        		476 ksi
        @Temperature 194 °F        		ASTM D638
        

         9.30 GPa
        @Temperature 23.0 °C        		1350 ksi
        @Temperature 73.4 °F        		ISO 527
        

         9.31 GPa
        @Temperature 23.0 °C        		1350 ksi
        @Temperature 73.4 °F        		ASTM D638
        

         9.79 GPa
        @Temperature -40.0 °C        		1420 ksi
        @Temperature -40.0 °F        		ASTM D638
        

        Flexural Strength  60.0 MPa
        @Temperature 150 °C        		8700 psi
        @Temperature 302 °F        		ASTM D790
        

         86.2 MPa
        @Temperature 90.0 °C        		12500 psi
        @Temperature 194 °F        		ASTM D790
        

         193 MPa
        @Temperature 23.0 °C        		28000 psi
        @Temperature 73.4 °F        		ASTM D790
        

         266 MPa
        @Temperature -40.0 °C        		38600 psi
        @Temperature -40.0 °F        		ASTM D790
        

        Flexural Modulus  2.25 GPa
        @Temperature 150 °C        		326 ksi
        @Temperature 302 °F        		ASTM D790
        

         2.30 GPa
        @Temperature 150 °C        		334 ksi
        @Temperature 302 °F        		ISO 178
        

         3.00 GPa
        @Temperature 93.0 °C        		435 ksi
        @Temperature 199 °F        		ISO 178
        

         3.01 GPa
        @Temperature 90.0 °C        		437 ksi
        @Temperature 194 °F        		ASTM D790
        

         7.83 GPa
        @Temperature 23.0 °C        		1140 ksi
        @Temperature 73.4 °F        		ISO 178
        

         8.28 GPa
        @Temperature 23.0 °C        		1200 ksi
        @Temperature 73.4 °F        		ASTM D790
        

         8.90 GPa
        @Temperature -40.0 °C        		1290 ksi
        @Temperature -40.0 °F        		ASTM D790
        

         8.90 GPa
        @Temperature -40.0 °C        		1290 ksi
        @Temperature -40.0 °F        		ISO 178
        

        Compressive Strength 148 MPa
        @Temperature 23.0 °C        		21500 psi
        @Temperature 73.4 °F        		ASTM D695
        

        Izod Impact, Notched  1.01 J/cm
        @Temperature -40.0 °C        		1.89 ft-lb/in
        @Temperature -40.0 °F        		ASTM D256
        

         1.33 J/cm
        @Temperature 23.0 °C        		2.49 ft-lb/in
        @Temperature 73.4 °F        		ASTM D256
        

        Izod Impact, Unnotched  9.60 J/cm
        @Temperature -40.0 °C        		18.0 ft-lb/in
        @Temperature -40.0 °F        		ASTM D4812
        

         9.60 J/cm
        @Temperature 23.0 °C        		18.0 ft-lb/in
        @Temperature 73.4 °F        		ASTM D4812
        

        Izod Impact, Notched (ISO) 13.0 kJ/m2
        @Temperature 23.0 °C        		6.19 ft-lb/in2
        @Temperature 73.4 °F        		ISO 180/1A
        

        Charpy Impact Unnotched  7.00 J/cm2
        @Temperature 23.0 °C        		33.3 ft-lb/in2
        @Temperature 73.4 °F        		ISO 179/1eU
        

         8.60 J/cm2
        @Temperature -30.0 °C        		40.9 ft-lb/in2
        @Temperature -22.0 °F        		ISO 179/1eU
        

        Charpy Impact, Notched  1.20 J/cm2
        @Temperature -30.0 °C        		5.71 ft-lb/in2
        @Temperature -22.0 °F        		ISO 179/1eA
        

         1.40 J/cm2
        @Temperature 23.0 °C        		6.66 ft-lb/in2
        @Temperature 73.4 °F        		ISO 179/1eA
        

         
        Electrical PropertiesMetricEnglishComments
        Volume Resistivity  1.00e+15 ohm-cm
        @Temperature 23.0 °C        		1.00e+15 ohm-cm
        @Temperature 73.4 °F        		ASTM D257
        

         1.00e+15 ohm-cm
        @Temperature 23.0 °C        		1.00e+15 ohm-cm
        @Temperature 73.4 °F        		IEC 60093
        

        Surface Resistance  1.00e+14 ohm
        @Temperature 23.0 °C        		1.00e+14 ohm
        @Temperature 73.4 °F        		ASTM D257
        

         1.00e+14 ohm
        @Temperature 23.0 °C        		1.00e+14 ohm
        @Temperature 73.4 °F        		IEC 60093
        

        Dielectric Constant  3.3
        @Frequency 1.00e+6 Hz,
         Temperature 23.0 °C        		3.3
        @Frequency 1.00e+6 Hz,
         Temperature 73.4 °F        		ASTM D150
        

         3.3
        @Frequency 1.00e+6 Hz,
         Temperature 23.0 °C        		3.3
        @Frequency 1.00e+6 Hz,
         Temperature 73.4 °F        		IEC 60250
        

         3.4
        @Frequency 1000 Hz,
         Temperature 23.0 °C        		3.4
        @Frequency 1000 Hz,
         Temperature 73.4 °F        		ASTM D150
        

         4.2
        @Frequency 100 Hz,
         Temperature 23.0 °C        		4.2
        @Frequency 100 Hz,
         Temperature 73.4 °F        		IEC 60250
        

        Dielectric Strength  12.0 kV/mm
        @Thickness 3.20 mm,
         Temperature 150 °C        		305 kV/in
        @Thickness 0.126 in,
         Temperature 302 °F        		500 V/s, in oil; Short Time; ASTM D149
        

         14.5 kV/mm
        @Thickness 1.60 mm,
         Temperature 150 °C        		368 kV/in
        @Thickness 0.0630 in,
         Temperature 302 °F        		500 V/s, in oil; Short Time; ASTM D149
        

         17.5 kV/mm
        @Thickness 3.20 mm,
         Temperature 95.0 °C        		445 kV/in
        @Thickness 0.126 in,
         Temperature 203 °F        		500 V/s, in oil; Short Time; ASTM D149
        

         21.5 kV/mm
        @Thickness 3.20 mm,
         Temperature 23.0 °C        		546 kV/in
        @Thickness 0.126 in,
         Temperature 73.4 °F        		500 V/s, in oil; Short Time; ASTM D149
        

         24.0 kV/mm
        @Thickness 1.60 mm,
         Temperature 95.0 °C        		610 kV/in
        @Thickness 0.0630 in,
         Temperature 203 °F        		500 V/s, in oil; Short Time; ASTM D149
        

         26.5 kV/mm
        @Thickness 1.60 mm,
         Temperature 23.0 °C        		673 kV/in
        @Thickness 0.0630 in,
         Temperature 73.4 °F        		500 V/s, in oil; Short Time; ASTM D149
        

        Dissipation Factor  0.010
        @Frequency 1000 Hz,
         Temperature 23.0 °C        		0.010
        @Frequency 1000 Hz,
         Temperature 73.4 °F        		ASTM D150
        

         0.015
        @Frequency 1.00e+6 Hz,
         Temperature 23.0 °C        		0.015
        @Frequency 1.00e+6 Hz,
         Temperature 73.4 °F        		ASTM D150
        

         0.015
        @Frequency 1.00e+6 Hz,
         Temperature 23.0 °C        		0.015
        @Frequency 1.00e+6 Hz,
         Temperature 73.4 °F        		IEC 60250
        

        Comparative Tracking Index 325 V
        @Thickness 3.00 mm,
         Temperature 23.0 °C        		325 V
        @Thickness 0.118 in,
         Temperature 73.4 °F        		UL 746A
        

         
        Thermal PropertiesMetricEnglishComments
        CTE, linear, Parallel to Flow  500 μm/m-°C
        @Temperature -40.0 - 23.0 °C        		278 μin/in-°F
        @Temperature -40.0 - 73.4 °F        		ASTM E 831
        

         500 μm/m-°C
        @Temperature 23.0 - 55.0 °C        		278 μin/in-°F
        @Temperature 73.4 - 131 °F        		ASTM E 831
        

         500 μm/m-°C
        @Temperature 55.0 - 160 °C        		278 μin/in-°F
        @Temperature 131 - 320 °F        		ASTM E 831
        

         500 μm/m-°C
        @Temperature -40.0 - 23.0 °C        		278 μin/in-°F
        @Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2
        

         500 μm/m-°C
        @Temperature 23.0 - 55.0 °C        		278 μin/in-°F
        @Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         500 μm/m-°C
        @Temperature 55.0 - 160 °C        		278 μin/in-°F
        @Temperature 131 - 320 °F        		ISO 11359-1/-2
        

          500 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 23.0 - 55.0 °C        		278 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 73.4 - 131 °F        		ASTM E 831
        

         500 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 23.0 - 55.0 °C        		278 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

        CTE, linear, Transverse to Flow  85.0 μm/m-°C
        @Temperature -40.0 - 23.0 °C        		47.2 μin/in-°F
        @Temperature -40.0 - 73.4 °F        		ASTM E 831
        

         85.0 μm/m-°C
        @Temperature 23.0 - 55.0 °C        		47.2 μin/in-°F
        @Temperature 73.4 - 131 °F        		ASTM E 831
        

         85.0 μm/m-°C
        @Temperature -40.0 - 23.0 °C        		47.2 μin/in-°F
        @Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2
        

         85.0 μm/m-°C
        @Temperature 23.0 - 55.0 °C        		47.2 μin/in-°F
        @Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         92.0 μm/m-°C
        @Temperature 55.0 - 160 °C        		51.1 μin/in-°F
        @Temperature 131 - 320 °F        		ASTM E 831
        

         92.0 μm/m-°C
        @Temperature 55.0 - 160 °C        		51.1 μin/in-°F
        @Temperature 131 - 320 °F        		ISO 11359-1/-2
        

          122 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 23.0 - 55.0 °C        		67.8 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 73.4 - 131 °F        		ASTM E 831
        

         122 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 23.0 - 55.0 °C        		67.8 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

        Melting Point 254 °C489 °FASTM D3418
        

        Deflection Temperature at 0.46 MPa (66 psi) 237 °C459 °FISO 75-1/-2
        

         240 °C464 °FASTM D648
        

        Deflection Temperature at 1.8 MPa (264 psi) 220 °C428 °FISO 75-1/-2
        

         220 °C428 °FASTM D648
        

        UL RTI, Electrical  140 °C
        @Thickness 0.750 mm        		284 °F
        @Thickness 0.0295 in        		UL 746B
        

         140 °C
        @Thickness 1.50 mm        		284 °F
        @Thickness 0.0591 in        		UL 746B
        

         140 °C
        @Thickness 3.00 mm        		284 °F
        @Thickness 0.118 in        		UL 746B
        

        UL RTI, Mechanical with Impact  140 °C
        @Thickness 3.00 mm        		284 °F
        @Thickness 0.118 in        		UL 746B
        

         140 °C
        @Thickness 1.50 mm        		284 °F
        @Thickness 0.0591 in        		UL 746B
        

         140 °C
        @Thickness 0.750 mm        		284 °F
        @Thickness 0.0295 in        		UL 746B
        

        UL RTI, Mechanical without Impact  140 °C
        @Thickness 3.00 mm        		284 °F
        @Thickness 0.118 in        		UL 746B
        

         140 °C
        @Thickness 0.750 mm        		284 °F
        @Thickness 0.0295 in        		UL 746B
        

         140 °C
        @Thickness 1.50 mm        		284 °F
        @Thickness 0.0591 in        		UL 746B
        

        Flammability, UL94  HB
        @Thickness 1.50 mm        		HB
        @Thickness 0.0591 in        		IEC 60695-11-10
        

         HB
        @Thickness 3.00 mm        		HB
        @Thickness 0.118 in        		IEC 60695-11-10
        

         HB
        @Thickness 0.750 mm        		HB
        @Thickness 0.0295 in        		IEC 60695-11-10
        

         HB
        @Thickness 0.750 mm        		HB
        @Thickness 0.0295 in        		UL94
        

         HB
        @Thickness 1.50 mm        		HB
        @Thickness 0.0591 in        		UL94
        

         HB
        @Thickness 3.00 mm        		HB
        @Thickness 0.118 in        		UL94
        

        Oxygen Index 22 %22 %ISO 4589-1/-2
        

         
        Processing PropertiesMetricEnglishComments
        Melt Temperature 250 °C482 °F10°C/min; ISO 11357-1/-3
        

         280 °C536 °FOptimum
        

         270 - 290 °C518 - 554 °F
        

        Mold Temperature >= 95.0 °C>= 203 °F
        

         110 °C230 °Foptimum
        

        Drying Temperature 120 °C248 °F
        

        Dry Time 4.00 hour4.00 hour
        

        Moisture Content <= 0.020 %<= 0.020 %
        

         
        Descriptive Properties
        AdditiveImpact Modifier
        AppearanceNatural Color
        Drying RecommendedYes
        FeaturesImpact Modified
         Impact Resistance, Good
         Stiffness, Good
         Strength, Good
         Thermal Aging Resistance, Good
        FillerGlass fiber reinforcement
        GenericPET
        Heat StabilizedYes
        Material StatusCurrent
        Part Marking Code>PET-IGF30<ISO 11469
        Polymer FamilyPolyester
        Polymer TypePET
        Processing MethodInjection Molding
        Product CategoryGlass Reinforced Resins
         Toughened Resins
        Resin IdentificationPET-IGF30ISO 1043
        RoHS ComplianceContact Manufacturer
        Ultrasonic WeldableYes
        UsesAutomotive Applications
         Housings
         Structural Parts
        
  
  

  

  
        
                        
        
                        
                    
        
                
        





                

                
        
                    
        轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/
        
                    
        本文鏈接: http://www.spnmy.cn/yuanliaoku/show-38922.html  
        
                    
        免責聲明: 本文 DuPont Performance Polymers Rynite? 408 NC010 PET 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡  
        
                
        

                




            
        
        
        
    
        



    
        
        
        
            
        
                
        
                    
        
                        塑膠原料之家，專業塑料網站、原料報價網站，免費發布塑膠供求信息。塑膠原料之家為您提供塑料供應、塑料求購、塑料行情、塑料展會、塑料原料資訊服務。
                    
        
                    
        
                        2008-2015 塑料|塑膠原料|物性表大全|UL黃卡|SGS報告查詢|最新價格--塑膠原料之家
                    
        
                    
        
                      滬ICP備15027283號-4
                    
        
                
        

            
        
        
        
    
        

    
    
    




主站蜘蛛池模板：
成全我在线观看免费第二季|
欧美性猛交xxxx乱大交丰满|
在线观看国产久青草|
成人一区二区三区在线午夜|
无码国模国产在线观看免费|
日本视频高清一道一区|
日本不卡码一区二区三区|
国产精品久久精品|
国产精品天堂蜜av在线播放|
嫩草院一区二区乱码|
国产精品福利在线观看秒播|
麻豆国产va免费精品高清在线|
久久精品66免费99精品|
国产精品无码av不卡|
国产无套粉嫩白浆在线精品|
亚洲av综合色区在线观看|
7878成人国产在线观看|
亚洲香蕉av一区二区蜜桃|
无卡无码无免费毛片|
亚洲精品一区久久久久一品av|
成人做受视频试看60秒|
人妻大胸奶水2|
国产午夜影视大全免费观看|
色综合欧美五月俺也去|
亚洲高清成人av在线|
久久精品道一区二区三区|
在线午夜精品自拍小视频|
激情动态图亚洲区域激情|
四虎永久免费很黄的视频|
国产精品天堂蜜av在线播放|
日本狂喷奶水在线播放212|
忍着娇喘人妻被中出中文字幕|
亚洲精品无amm毛片|
av网站免费线看精品|
怡春院久久国语视频免费|
艳妇乳肉豪妇荡乳xxx|
国产精品伊人久久综合网|
国产美熟女乱又伦AV果冻传媒
|
91亚洲免费视频|
女人腿张开让男人桶爽|
人人人爽人人爽人人av|