- 密度 [g/cm3]: 0.99
- 彎曲強度 [MPa]: 2.76
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.990 g/cc | 0.0358 lb/in3 | A Component; ASTM D1475 |
| 1.21 g/cc | 0.0437 lb/in3 | B Component; ASTM D1475 | |
| Viscosity | 35 cP | 35 cP | B Component; ASTM D1824 |
| Outgassing - Total Mass Loss | 0.38 % | 0.38 % | Cured property; at 10E-6 torr; ASTM E-595 |
| Collected Volatile Condensable Material | 0.030 % | 0.030 % | Cured property; at 10E-6 torr; ASTM E595 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore A | 55 | 55 | Cured property; ASTM D2240 |
| Tensile Strength, Ultimate | 2.76 MPa | 400 psi | Cured property; ASTM D412 |
| Elongation at Break | 265 % | 265 % | Cured property; ASTM D412 |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 5.30e+15 ohm-cm | 5.30e+15 ohm-cm | Cured property; ASTM D257 |
| Dielectric Constant | 3.5 @Frequency 1000 Hz | 3.5 @Frequency 1000 Hz | Cured property; ASTM D150 |
| Dielectric Strength | >= 14.2 kV/mm | >= 360 kV/in | Cured property; 0.1 inch; ASTM D149 |
| Dissipation Factor | 0.030 @Frequency 1000 Hz | 0.030 @Frequency 1000 Hz | Cured property; ASTM D150 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 79.0 μm/m-°C @Temperature 20.0 °C | 43.9 μin/in-°F @Temperature 68.0 °F | Cured property; alpha 1; JMTP P200 |
| 185 μm/m-°C @Temperature 20.0 °C | 103 μin/in-°F @Temperature 68.0 °F | Cured property; alpha 2; JMTP P200 | |
| Glass Transition Temp, Tg | -70.0 °C | -94.0 °F | Cured property; JMTP 200 |
| Flash Point | >= 150 °C | >= 302 °F | A Component; ASTM D92 |
| >= 150 °C | >= 302 °F | B Component; ASTM D92 | |
| Processing Properties | Metric | English | Comments |
| Processing Temperature | 80.0 °C | 176 °F | Cure 5 hrs + 2 hrs at RT |
| 100 °C | 212 °F | Cure 3 hrs + 2 hrs at RT | |