- 密度 [g/cm3]: 1.4
- 吸水率 [%]: 2.2
- 缺口沖擊強度: 8.0
- 拉伸強度 [MPa]: 40.0
- 彎曲模量 [MPa]: 7.00
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.40 g/cc | 0.0506 lb/in3 | ISO R 1183 | ||
| Water Absorption at Saturation | 2.2 % @Temperature 20.0 °C | 2.2 % @Temperature 68.0 °F | ISO R 62 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Ball Indentation Hardness | 130 MPa | 18900 psi | Hc 30; ISO 2039; partially | ||
| Tensile Strength, Yield | 40.0 - 60.0 MPa | 5800 - 8700 psi | ISO-DIS 527 | ||
| Flexural Strength | 60.0 MPa | 8700 psi | DIN 54352 | ||
| Flexural Modulus | 7.00 - 10.0 GPa | 1020 - 1450 ksi | DIN 53457 | ||
| Compressive Strength | 140 MPa | 20300 psi | ISO 604 | ||
| Izod Impact, Notched (ISO) | >= 8.00 kJ/m2 | >= 3.81 ft-lb/in2 | DIN 53453 | ||
| Izod Impact Resistance | >= 0.800 J/cm2 | >= 3.81 ft-lb/in2 | swinging hammer 0,1 DIN 51222; DIN 53453 | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+9 ohm-cm | 1.00e+9 ohm-cm | DIN 53482 | ||
| Surface Resistance | 1.00e+8 ohm | 1.00e+8 ohm | DIN 53482 | ||
| Dielectric Constant | 6.0 - 10 @Frequency 1000 Hz | 6.0 - 10 @Frequency 1000 Hz | DIN 53483 | ||
| Dielectric Strength | 20.0 kV/mm | 508 kV/in | DIN 53481 | ||
| Dielectric Loss Index | 0.40 @Frequency 1000 Hz | 0.40 @Frequency 1000 Hz | DIN 53483 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear | 30.0 - 40.0 μm/m-°C @Temperature 20.0 - 100 °C | 16.7 - 22.2 μin/in-°F @Temperature 68.0 - 212 °F | DIN 53752 | ||
| Thermal Conductivity | 0.300 W/m-K | 2.08 BTU-in/hr-ft2-°F | DIN 52612 | ||
| Maximum Service Temperature, Air | 125 °C | 257 °F | Continuous | ||
| 150 °C | 302 °F | Intermittent | |||
| Descriptive Properties | |||||
| Moisture Absorption at Equilibrium | 300 mg | DIN 53472 | |||