- 密度 [g/cm3]: 1.4
- 缺口沖擊強度: 18.0
- 拉伸強度 [MPa]: 60.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.40 g/cc | 0.0506 lb/in3 | ISO R 1183 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Ball Indentation Hardness | 130 MPa | 18900 psi | Hc 30; ISO 2039; partially | ||
| Tensile Strength, Yield | 60.0 MPa | 8700 psi | ISO-DIS 527 | ||
| Tensile Modulus | 6.00 - 8.00 GPa | 870 - 1160 ksi | DIN 53457 | ||
| Flexural Strength | 80.0 MPa | 11600 psi | DIN 54352 | ||
| Compressive Strength | 150 MPa | 21800 psi | ISO 604 | ||
| Izod Impact, Notched (ISO) | 18.0 kJ/m2 | 8.57 ft-lb/in2 | DIN 53453 | ||
| Izod Impact Resistance | 2.50 J/cm2 | 11.9 ft-lb/in2 | swinging hammer 0,1 DIN 51222; DIN 53453 | ||
| Electrical Properties | Metric | English | Comments | ||
| Dielectric Constant | 5.0 | 5.0 | DIN 53483 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear | 15.0 - 30.0 μm/m-°C @Temperature 20.0 - 100 °C | 8.33 - 16.7 μin/in-°F @Temperature 68.0 - 212 °F | DIN 53752 | ||
| Thermal Conductivity | 0.300 W/m-K | 2.08 BTU-in/hr-ft2-°F | DIN 52612 | ||
| Maximum Service Temperature, Air | 125 °C | 257 °F | Continuous | ||
| 150 °C | 302 °F | Intermittent | |||
| Descriptive Properties | |||||
| Creepage/leakage Resistance | KC100 | DIN 53480 | |||
| Moisture Absorption at Equilibrium | 450 mg | DIN 53472 | |||