- 密度 [g/cm3]: 1.59
- 吸水率 [%]: 0.36
- 缺口沖擊強(qiáng)度: 0.206
- 彎曲強(qiáng)度 [MPa]: 76.0
- 彎曲模量 [MPa]: 9.20
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.670 g/cc | 0.0242 lb/in3 | ASTM D1895 |
| Density | 1.59 g/cc | 0.0574 lb/in3 | ASTM D792 |
| Water Absorption | 0.36 % | 0.36 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0054 cm/cm | 0.0054 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 86 | 86 | ASTM D785 |
| Tensile Strength, Ultimate | 76.0 MPa | 11000 psi | ASTM D638 |
| Elongation at Break | 0.88 % | 0.88 % | ASTM D638 |
| Tensile Modulus | 9.20 GPa | 1330 ksi | ASTM D638 |
| Flexural Strength | 108 MPa | 15700 psi | ASTM D790 |
| Flexural Modulus | 9.20 GPa | 1330 ksi | ASTM D790 |
| Compressive Strength | 204 MPa | 29600 psi | ASTM D695 |
| Izod Impact, Notched | 0.206 J/cm | 0.386 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.221 J/cm2 | 1.05 ft-lb/in2 | ASTM D256 |
| Impact | 118 | 118 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 3.50e+13 ohm-cm | 3.50e+13 ohm-cm | ASTM D247 |
| Dielectric Constant | 6.8 | 6.8 | ASTM D150 |
| Dielectric Strength | 9.80 kV/mm | 249 kV/in | Step by Step; ASTM D149 |
| 12.9 kV/mm | 328 kV/in | Short Time; ASTM D149 | |
| Dissipation Factor | 0.051 | 0.051 | ASTM D150 |
| Arc Resistance | 185 sec | 185 sec | ASTM D495 |
| Comparative Tracking Index | 600 V | 600 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Thermal Conductivity | 0.510 W/m-K @Temperature 100 °C | 3.54 BTU-in/hr-ft2-°F @Temperature 212 °F | ASTM E1461 |
| Maximum Service Temperature, Air | 150 °C | 302 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 197 °C | 387 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 0.610 mm | V-0 @Thickness 0.0240 in | |
| Oxygen Index | 33 % | 33 % | ASTM D2863 |
| Shrinkage | 0.83 % | 0.83 % | 240 hr, 105oC; ASTM D1299 |