- 密度 [g/cm3]: 1.45
- 吸水率 [%]: 0.5
- 缺口沖擊強度: 0.27
- 彎曲強度 [MPa]: 38.0
- 彎曲模量 [MPa]: 7.00
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Bulk Density | 0.450 g/cc | 0.0163 lb/in3 | Powder; ASTM D1895 | ||
| Density | 1.45 g/cc | 0.0524 lb/in3 | ASTM D-792 | ||
| Water Absorption | 0.50 % | 0.50 % | 24 hour; ASTM D570 | ||
| 1.2 % | 1.2 % | 48 hour; ASTM D570 | |||
| Linear Mold Shrinkage | 0.0040 cm/cm | 0.0040 in/in | ASTM D955 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Rockwell E | 115 | 115 | ASTM D785 | ||
| Tensile Strength, Ultimate | 38.0 MPa | 5510 psi | ASTM D638 | ||
| Flexural Strength | 55.0 MPa | 7980 psi | ASTM D790 | ||
| Flexural Modulus | 7.00 GPa | 1020 ksi | ASTM D790 | ||
| Compressive Strength | 105 MPa | 15200 psi | ASTM D695 | ||
| Izod Impact, Notched | 0.270 J/cm | 0.506 ft-lb/in | ASTM D256A | ||
| Electrical Properties | Metric | English | Comments | ||
| Dielectric Strength | 7.90 kV/mm | 201 kV/in | 60 Hz, wet, SS; ASTM D149 | ||
| 10.2 kV/mm | 259 kV/in | ST; ASTM D149 | |||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 26.0 μm/m-°C @Temperature 20.0 °C | 14.4 μin/in-°F @Temperature 68.0 °F | ASTM E831 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 180 °C | 356 °F | As Molded; ASTM D648A | ||
| Descriptive Properties | |||||
| Available Molding Grades | Compression, Transfer, Injection | ||||
| Color | Black | ||||
| Form | Granular | ||||