- 密度 [g/cm3]: 1.77
- 吸水率 [%]: 0.23
- 缺口沖擊強度: 0.3
- 彎曲強度 [MPa]: 75.0
- 彎曲模量 [MPa]: 15.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Bulk Density | 0.800 g/cc | 0.0289 lb/in3 | Powder; ASTM D1895 | ||
| Density | 1.77 g/cc | 0.0639 lb/in3 | ASTM D-792 | ||
| Water Absorption | 0.23 % | 0.23 % | 48 hour; ASTM D570 | ||
| Linear Mold Shrinkage | 0.0025 cm/cm | 0.0025 in/in | ASTM D955 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength, Ultimate | 75.0 MPa | 10900 psi | ASTM D638 | ||
| Flexural Strength | 140 MPa | 20300 psi | ASTM D790 | ||
| Flexural Modulus | 15.0 GPa | 2180 ksi | ASTM D790 | ||
| Compressive Strength | 255 MPa | 37000 psi | ASTM D695 | ||
| Izod Impact, Notched | 0.300 J/cm | 0.562 ft-lb/in | ASTM D256A | ||
| Electrical Properties | Metric | English | Comments | ||
| Dielectric Strength | 8.00 kV/mm | 203 kV/in | 60 Hz, wet, SS; ASTM D149 | ||
| 10.0 kV/mm | 254 kV/in | ST; ASTM D149 | |||
| Arc Resistance | 180 sec | 180 sec | ASTM D495 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 19.0 μm/m-°C @Temperature 20.0 °C | 10.6 μin/in-°F @Temperature 68.0 °F | ASTM E831 | ||
| Maximum Service Temperature, Air | 150 °C | 302 °F | UL Temperature Index; UL 746B | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 190 °C | 374 °F | As Molded; ASTM D648A | ||
| >= 282 °C | >= 540 °F | Post Baked; ASTM D648A | |||
| Flammability, UL94 | V-0 @Thickness 3.20 mm | V-0 @Thickness 0.126 in | |||
| Descriptive Properties | |||||
| Available Molding Grades | Compression, Transfer, Injection | ||||
| Color | Black, Green | ||||
| Form | Granular | ||||