- 熔體流動速率 [g/10min]: 2.5
- 密度 [g/cm3]: 1.19
- 吸水率 [%]: 0.3
- 缺口沖擊強度: 0.21
- 斷裂伸長率 [%]: 110
- 彎曲強度 [MPa]: 72.0
- 透光率 [%]: 92.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.19 g/cc | 0.0430 lb/in3 | ASTM D792 |
| Water Absorption | 0.30 % | 0.30 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0030 - 0.0070 cm/cm | 0.0030 - 0.0070 in/in | ASTM D955 |
| Melt Flow | 2.5 g/10 min | 2.5 g/10 min | ASTM D1238I |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 72.0 MPa | 10400 psi | ASTM D638 |
| Modulus of Elasticity | 2.96 GPa | 429 ksi | ASTM D638 |
| Flexural Yield Strength | 110 MPa | 16000 psi | ASTM D790 |
| Izod Impact, Notched | 0.210 J/cm | 0.393 ft-lb/in | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Dielectric Constant | 3.7 @Frequency 60 Hz | 3.7 @Frequency 60 Hz | ASTM D150 |
| Dissipation Factor | 0.050 @Frequency 60 Hz | 0.050 @Frequency 60 Hz | ASTM D150 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 54.0 μm/m-°C @Temperature 17.0 - 37.0 °C | 30.0 μin/in-°F @Temperature 62.6 - 98.6 °F | ASTM D696 |
| Specific Heat Capacity | 1.46 J/g-°C | 0.349 BTU/lb-°F | |
| Thermal Conductivity | 0.200 W/m-K | 1.39 BTU-in/hr-ft2-°F | ASTM C177 |
| Melting Point | 157 °C | 315 °F | Flow Temperature; ASTM D569 |
| Maximum Service Temperature, Air | 92.0 °C | 198 °F | Deflection Temperature with load unspecified; ASTM D648 |
| Flammability, UL94 | HB | HB | |
| Optical Properties | Metric | English | Comments |
| Refractive Index | 1.49 | 1.49 | ASTM D542 |
| Transmission, Visible | 92 % | 92 % | ASTM D1003 |