- 密度 [g/cm3]: 1.26
- 吸水率 [%]: 0.2
- 缺口沖擊強度: 0.427
- 斷裂伸長率 [%]: 110
- 彎曲強度 [MPa]: 75.8
- 彎曲模量 [MPa]: 3.45
- 熱變形溫度 [℃]: 93.3
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.26 - 1.52 g/cc | 0.0455 - 0.0549 lb/in3 | Average value: 1.38 g/cc Grade Count:4 |
| Filler Content | 10.0 - 40.0 % | 10.0 - 40.0 % | Average value: 25.0 % Grade Count:4 |
| Water Absorption | 0.200 - 0.300 % | 0.200 - 0.300 % | Average value: 0.250 % Grade Count:4 |
| Linear Mold Shrinkage | 0.00100 - 0.00300 cm/cm | 0.00100 - 0.00300 in/in | Average value: 0.00175 cm/cm Grade Count:4 |
| Linear Mold Shrinkage, 6.35 mm section | 0.00200 - 0.00400 cm/cm | 0.00200 - 0.00400 in/in | Average value: 0.00275 cm/cm Grade Count:4 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 75.8 - 121 MPa | 11000 - 17500 psi | Average value: 97.4 MPa Grade Count:4 |
| Elongation at Break | 1.00 % | 1.00 % | Average value: 1.00 % Grade Count:4 |
| Modulus of Elasticity | 3.79 - 12.8 GPa | 550 - 1850 ksi | Average value: 8.45 GPa Grade Count:4 |
| Flexural Yield Strength | 110 - 179 MPa | 16000 - 26000 psi | Average value: 143 MPa Grade Count:4 |
| Flexural Modulus | 3.45 - 12.4 GPa | 500 - 1800 ksi | Average value: 8.27 GPa Grade Count:4 |
| Izod Impact, Notched | 0.427 - 0.534 J/cm | 0.800 - 1.00 ft-lb/in | Average value: 0.494 J/cm Grade Count:4 |
| Izod Impact, Unnotched | 1.60 - 2.14 J/cm | 3.00 - 4.00 ft-lb/in | Average value: 1.80 J/cm Grade Count:4 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 1.00e+16 - 1.00e+17 ohm-cm | 1.00e+16 - 1.00e+17 ohm-cm | Average value: 7.75e+16 ohm-cm Grade Count:4 |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 0.46 MPa (66 psi) | 93.3 - 102 °C | 200 - 215 °F | Average value: 98.2 °C Grade Count:4 |
| Deflection Temperature at 1.8 MPa (264 psi) | 90.6 - 96.1 °C | 195 - 205 °F | Average value: 93.3 °C Grade Count:4 |
| Flammability, UL94 | HB | HB | Grade Count:4 |
| Processing Properties | Metric | English | Comments |
| Processing Temperature | 177 - 210 °C | 350 - 410 °F | Average value: 193 °C Grade Count:4 |
| Mold Temperature | 79.4 - 107 °C | 175 - 225 °F | Average value: 93.3 °C Grade Count:4 |
| Injection Pressure | 68.9 - 103 MPa | 10000 - 15000 psi | Average value: 86.2 MPa Grade Count:4 |