少妇高潮太爽了在线视频,久久久精品94久久精品,欧美国产日韩久久mv,精品国产女同疯狂摩擦2,91精品久久久久久无码人妻

Ultramid? 8267G HS BK106|PA6-(MD+GF)40|BASF

Product TextsUltramid? 8267G HS BK106 is a heat stabilized, mineral and glass fiber reinforced Polyamid 6 injection molding compound. It possesses a balance of engineering properties in combination with excellent dimensional stability and warpage resistance. The combination of mineral and glass fibers results in a high performance, cost effective engineering thermoplastic. It exhibits good strength, rigidity and heat distortion temperature. It resists creep and has good chemical resistance to greases, oils

機械性能(機械性能(Mechanical properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	9200 / -	MPa	ISO 527-1/-2
破壞時應變(Stress at break)	115 / -	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	2 / -	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	46 / -	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	5.5 / -	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	220 / *	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	200 / *	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	215 / *	°C	ISO 75-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	30 / *	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	67 / *	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	3.0 / *	mm	IEC 60695-11-10
UL 識別(recognition)	UL / *	-	-

電氣性能(Electrical properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
體積電阻率(Volume resistivity)	>1E13 / -	Ohm*m	IEC 60093

其他屬性(Other properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	5.7 / *	%	Sim. to ISO 62
吸濕性(Humidity absorption)	1.6 / *	%	Sim. to ISO 62
密度(Density)	1480 / *	kg/m3	ISO 1183

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
密度(Density) of melt	1290	kg/m3	-
熔體熱導率(Thermal conductivity of melt)	0.25	W/(m K)	-
規格的熱容融化(Spec. heat capacity of melt)	2030	J/(kg K)	-

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	275	°C	ISO 294
Injection Molding, mold temperature	95	°C	ISO 10724

Diagrams Water content: 0.12% If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80 °C (176 °F) is recommended. Drying time is dependent on moisture level. Alternatively, please contact your BASF representative. Packing pressure affects the final part and can be use It should be applied and maintained until the gate area is completely frozen off.A maximum of 3.5 bar (50 psi) is recommended to minimize glass fiber breakage. Surface appearance is directly affected by injection rateDisclaimerCopyright M-Base .

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-94828.html

免責聲明: 本文 Ultramid? 8267G HS BK106|PA6-(MD+GF)40|BASF 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡