五月婷之久久综合丝袜美腿,夜夜爽免费888视频,久久无码专区国产精品,精品久久久久国产免费,AV毛片无码中文字幕不卡

加工/物理特性	值(Value)	單位(Unit)	測試標準(Test Standard)
ASTM數據(ASTM Data)
熔體流動指數(Melt Flow Index)	11	g/10min	ASTM D 1238
溫度(Temperature)	250	°C	-
負載(Load)	5	kg	-
密度(Density) (73°F)	1580	kg/m3	ASTM D 792

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
熔體體積流動速率(Melt volume-flow rate) (MVR)	25	cm3/10min	ISO 1133
溫度(Temperature)	265	°C	ISO 1133
負載(Load)	5	kg	ISO 1133
熔體流動指數(熔體流動指數(Melt flow index)) (MFI)	11	g/10min	ISO 1133
MFI溫度(MFI temperature)	250	°C	ISO 1133
MFI負載(MFI load)	5	kg	ISO 1133

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
拉伸模量(Tensile Modulus)	12000	MPa	ISO 527-1/-2
破壞時應變(Stress at break)	105	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	2	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	30	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	30	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	7	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	7	kJ/m2	ISO 179/1eA
彎曲彈性模量(Flexural modulus) (23°C)	10000	MPa	ISO 178
懸臂梁式?jīng)_擊切口 (23°C)	7	kJ/m2	ISO 180/1A
懸臂梁式?jīng)_擊切口	7	kJ/m2	ISO 180/1A
溫度(Temperature)	-30	°C	ISO 180/1A
懸臂梁式?jīng)_擊無切口(Izod Impact unnotched) (23°C)	30	kJ/m2	ISO 180/1U
球壓痕硬度(Ball indentation hardness)	166	MPa	ISO 2039-1
ASTM數據(ASTM Data)
拉伸模量(Tensile Modulus)	12000	MPa	ASTM D 638
抗拉強度(Tensile Strength) at Yield	103	MPa	ASTM D 638
抗拉強度(Tensile Strength) at Break	103	MPa	ASTM D 638
屈服伸長率(Elongation at Yield)	1	%	ASTM D 638
斷裂伸長率(Elongation at Break)	2	%	ASTM D 638
彎曲彈性模量(彎曲彈性模量(Flexural Modulus))	10000	MPa	ASTM D 790
洛氏硬度(Rockwell Hardness)	R 118	-	ASTM D 785
懸臂梁式?jīng)_擊切口 (1/8 in)	0.06	kJ/m	ASTM D 256
懸臂梁式?jīng)_擊切口 (Low-溫度(Temperature))	0.06	kJ/m	ASTM D 256
溫度(Temperature)	-30	°C	ASTM D 256
懸臂梁式?jīng)_擊無切口(Izod Impact unnotched) (1/8 in)	0.45	kJ/m	ASTM D 256

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	180	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	215	°C	ISO 75-1/-2
Vicat softening temperature A	215	°C	ISO 306
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	203	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	19	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	56	E-6/K	ISO 11359-1/-2
Burning behav. 5V at thickness h	5VA	class	IEC 60695-11-20
厚度測試(Thickness tested)	3.0	mm	IEC 60695-11-20
ASTM數據(ASTM Data)
UL 94 阻燃等級(Flame rating)	V-0	-	UL 94
厚度測試(Thickness tested)	1.5	mm	-
DTUL @ 66 psi	210	°C	ASTM D 648
DTUL @ 264 psi	196	°C	ASTM D 648
Vicat 溫度(Temperature)	220	°C	ASTM D 1525

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
相對介電常數(Relative permittivity) (1MHz)	3.6	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	120	E-4	IEC 60250
體積電阻率(Volume resistivity)	1E13	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	>1E15	Ohm	IEC 60093
電氣強度(Electric strength)	25	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	425	-	IEC 60112
ASTM數據(ASTM Data)
絕緣強度(Dielectric Strength) (Short Time)	25	kV/mm	ASTM D 149
耗散因數(Dissipation Factor) (1 MHz)	0.012	-	ASTM D 150
介電常數(Dielectric Constant) (1 MHz)	3.6	-	ASTM D 150
體積電阻率(Volume Resistivity)	1E15	Ohm*cm	ASTM D 257

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
吸水率(Water absorption)	0.3	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.05	%	Sim. to ISO 62
密度(Density)	1580	kg/m3	ISO 1183

CharacteristicsProcessingInjection MoldingSpecial CharacteristicsFlame retardantRegional AvailabilityEurope, Near East/AfricaDisclaimerCopyright M-Base .

Valox ENH8560|(PBT+PET)-GF30|沙特基礎