蜜桃在线一区二区三区,五月天免费中文字幕av,亚洲午夜福利精品无码不卡,99国产精品永久免费视频,精品无人区卡一卡二卡三乱码

加工/物理特性	值(Value)	單位(Unit)	測試標準(Test Standard)
ASTM數據(ASTM Data)
熔體流動指數(Melt Flow Index)	23	g/10min	ASTM D 1238
溫度(Temperature)	265	°C	-
負載(Load)	5	kg	-
密度(Density) (73°F)	1560	kg/m3	ASTM D 792

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
熔體體積流動速率(Melt volume-flow rate) (MVR)	16	cm3/10min	ISO 1133
溫度(Temperature)	250	°C	ISO 1133
負載(Load)	5	kg	ISO 1133

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
拉伸模量(Tensile Modulus)	11000	MPa	ISO 527-1/-2
破壞時應變(Stress at break)	105	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	2	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	40	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	35	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	10	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	10	kJ/m2	ISO 179/1eA
彎曲彈性模量(Flexural modulus) (23°C)	10000	MPa	ISO 178
懸臂梁式?jīng)_擊切口 (23°C)	9	kJ/m2	ISO 180/1A
懸臂梁式?jīng)_擊切口	9	kJ/m2	ISO 180/1A
溫度(Temperature)	-30	°C	ISO 180/1A
懸臂梁式?jīng)_擊無切口(Izod Impact unnotched) (23°C)	37	kJ/m2	ISO 180/1U
洛氏硬度(Rockwell hardness)	R 120	-	ISO 2039-2
球壓痕硬度(Ball indentation hardness)	142	MPa	ISO 2039-1
ASTM數據(ASTM Data)
拉伸模量(Tensile Modulus)	11000	MPa	ASTM D 638
抗拉強度(Tensile Strength) at Yield	110	MPa	ASTM D 638
抗拉強度(Tensile Strength) at Break	110	MPa	ASTM D 638
屈服伸長率(Elongation at Yield)	2	%	ASTM D 638
斷裂伸長率(Elongation at Break)	2	%	ASTM D 638
彎曲彈性模量(彎曲彈性模量(Flexural Modulus))	8999.99	MPa	ASTM D 790
懸臂梁式?jīng)_擊切口 (1/8 in)	0.075	kJ/m	ASTM D 256
懸臂梁式?jīng)_擊切口 (Low-溫度(Temperature))	0.075	kJ/m	ASTM D 256
溫度(Temperature)	-30	°C	ASTM D 256
懸臂梁式?jīng)_擊無切口(Izod Impact unnotched) (1/8 in)	0.5	kJ/m	ASTM D 256

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	210	°C	ISO 75-1/-2
Vicat softening temperature A	220	°C	ISO 306
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	206	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	20	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	62	E-6/K	ISO 11359-1/-2
Burning behav. 5V at thickness h	5VB	class	IEC 60695-11-20
厚度測試(Thickness tested)	3.0	mm	IEC 60695-11-20
ASTM數據(ASTM Data)
UL 94 阻燃等級(Flame rating)	V-0	-	UL 94
厚度測試(Thickness tested)	0.8	mm	-
DTUL @ 66 psi	223	°C	ASTM D 648
DTUL @ 264 psi	210	°C	ASTM D 648
Vicat 溫度(Temperature)	217	°C	ASTM D 1525

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
相對介電常數(Relative permittivity) (1MHz)	3.8	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	1400	E-4	IEC 60250
體積電阻率(Volume resistivity)	1E12	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	>1E15	Ohm	IEC 60093
電氣強度(Electric strength)	22	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	600	-	IEC 60112
ASTM數據(ASTM Data)
絕緣強度(Dielectric Strength) (Short Time)	22	kV/mm	ASTM D 149
耗散因數(Dissipation Factor) (1 MHz)	0.14	-	ASTM D 150
介電常數(Dielectric Constant) (1 MHz)	3.8	-	ASTM D 150
體積電阻率(Volume Resistivity)	1E14	Ohm*cm	ASTM D 257

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
密度(Density)	1560	kg/m3	ISO 1183

CharacteristicsProcessingInjection MoldingSpecial CharacteristicsFlame retardantRegional AvailabilityEurope, Near East/AfricaDisclaimerCopyright M-Base .

Valox ENH4560|PBT|沙特基礎