一本无码人妻在中文字幕免费,亚洲国产午夜精品理论片在线播放 ,2020国产欧洲精品网站,AV毛片无码中文字幕不卡,在线人成免费视频69国产

Product TextsCommon features of thermoplastic polyester resin include mechanical and physical properties such as stiffness and toughness, heat resistance, friction and wear resistance, excellent surface finishes and good colourability. Crastin? thermoplastic polyester resin has excellent electrical insulation characteristics and high arc-resistant grades are available. Many flame retardant grades have UL 識別(recognition) (class V-0). Crastin? thermoplastic polyester resin typically has high chemical and heat agFor disposal, local regulations have to be observed.It has improved surface aesthetics, excellent dimensional stability and low warpage characteristics.2	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	0.6	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	10500	MPa	ISO 527-1/-2
破壞時應變(Stress at break)	125	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	1.8	%	ISO 527-1/-2
Tensile creep modulus (1h)	9500	MPa	ISO 899-1
Tensile creep modulus (1000h)	7400	MPa	ISO 899-1
簡支梁沖擊強度(Charpy impact strength) (+23°C)	40	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	40	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	8	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	8	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	225	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	190	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (8.00 MPa)	106	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	150	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	25	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	80	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	V-0	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.5	mm	IEC 60695-11-10
UL 識別(recognition)	UL	-	-
燃燒性(球壓痕硬度(Burning behav)). at thickness h	V-0	class	IEC 60695-11-10
厚度測試(Thickness tested)	0.8	mm	IEC 60695-11-10
UL 識別(recognition)	UL	-	-
燃燒性(球壓痕硬度(Burning behav)). 5V at thickness h	5VA	class	IEC 60695-11-20
厚度測試(Thickness tested)	3.0	mm	IEC 60695-11-20
Oxygen index	27	%	ISO 4589-1/-2

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	3.8	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	3.6	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	30	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	150	E-4	IEC 60250
體積電阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	1E14	Ohm	IEC 60093
電氣強度(Electric strength)	28	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	400	-	IEC 60112

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.72	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.21	%	Sim. to ISO 62
密度(Density)	1570	kg/m3	ISO 1183

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
密度(Density) of melt	1420	kg/m3	-
熔體熱導率(Thermal conductivity of melt)	0.26	W/(m K)	-
規格的熱容融化(Spec. heat capacity of melt)	1850	J/(kg K)	-

Diagrams ISO 1817 Liquid C) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid 4) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (90°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (>90°C)[/td][/tr][tr][td]Salt solutions[/td][/tr][tr][td] 4 Brake fluid (130°C)[/td][/tr][tr][td] .
[/td][/tr][/table]

Crastin? LW9030FR NC010|(PBT+ASA)-GF30 FR(17)|DuPont