国产啪视频免费观看视频,亚洲欧美综合精品成人导航,日本熟妇色xxxxx日本免费看 ,亚洲日本国产精品一区,国产精品天干天干综合网

CELANEX 2008|PBT|Ticona

CELANEX 2008|PBT|Ticona 物性表: CELANEX 2008|PBT|Ticona物性表及特性介紹,CELANEX 2008|PBT|Ticona注塑參數詳情,如需CELANEX 2008|PBT|Ticona下載, 可到相關下載區下載

Product TextsCelanex 2008 is a general purpose, unreinforced polybutylene

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	2600	MPa	ISO 527-1/-2
破壞時應變(Stress at break)	60	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	5	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	38	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	44	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	2.8	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	2.1	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	225	°C	ISO 11357-1/-3
玻璃化轉變溫度(Glass transition temperature) (10°C/min)	60	°C	ISO 11357-1/-2
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	57	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	155	°C	ISO 75-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	110	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	100	E-6/K	ISO 11359-1/-2

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	3.3	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	3.2	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	200	E-4	IEC 60250
體積電阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	>1E15	Ohm	IEC 60093
電氣強度(Electric strength)	15	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	350	-	IEC 60112

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.45	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.17	%	Sim. to ISO 62
密度(Density)	1310	kg/m3	ISO 1183

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Processing conditions acc. ISO	7790	-	ISO ....-2
Injection Molding, melt temperature	243	°C	ISO 294
Injection Molding, mold temperature	82	°C	ISO 10724
Injection Molding, injection velocity	300	mm/s	ISO 294
Injection Molding, pressure at hold	48	MPa	ISO 294

Diagrams02%. Drying .

關鍵詞:
PBT
Ticona
CELANEX 2008

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-83367.html

免責聲明: 本文 CELANEX 2008|PBT|Ticona 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡