亚洲成av人片一区二区,日韩亚洲中文图片小说,精品在线观看视频二区,在线视频观看,饥渴的熟妇张开腿呻吟视频

Product TextsCelanex 3200-2 is a general purpose, 15% glass reinforced polybutyleneCelanex 3200-2 contains an internal lubricant.

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔體體積流動速率(Melt volume-flow rate) (MVR)	26	cm3/10min	ISO 1133
溫度(Temperature)	250	°C	ISO 1133
負載(Load)	2.16	kg	ISO 1133

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	5800	MPa	ISO 527-1/-2
破壞時應變(Stress at break)	100	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	3.5	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	20	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	20	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	5.5	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	5	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	225	°C	ISO 11357-1/-3
玻璃化轉變溫度(Glass transition temperature) (10°C/min)	60	°C	ISO 11357-1/-2
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	195	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (8.00 MPa)	90	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	215	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	40	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	110	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	0.7	mm	IEC 60695-11-10
Oxygen index	20	%	ISO 4589-1/-2

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	4.2	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	3.8	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	16	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	200	E-4	IEC 60250
體積電阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	>1E15	Ohm	IEC 60093
電氣強度(Electric strength)	29	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	350	-	IEC 60112

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.45	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.2	%	Sim. to ISO 62
密度(Density)	1410	kg/m3	ISO 1183

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Processing conditions acc. ISO	7790	-	ISO ....-2
Injection Molding, melt temperature	260	°C	ISO 294
Injection Molding, mold temperature	82	°C	ISO 10724
Injection Molding, injection velocity	300	mm/s	ISO 294
Injection Molding, pressure at hold	48	MPa	ISO 294

CharacteristicsProcessingInjection MoldingDelivery formPelletsAdditivesLubricantsRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING02%. Drying .

CELANEX 3200-2|PBT-GF15|Ticona