国产高清在线精品一区不卡,国产精品视频午夜福利,毛片内射久久久一区,日韩成人无码影院,色伦专区97中文字幕

POLYform POM C M90 GF10|POM-GF10|Polykemi

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
成型收縮(Molding shrinkage) (parallel)	1.1	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	1.1	%	ISO 294-4, 2577
熔體流動指數(熔體流動指數(Melt flow index)) (MFI)	9	g/10min	ISO 1133
MFI溫度(MFI temperature)	190	°C	ISO 1133
MFI負載(MFI load)	2.16	kg	ISO 1133

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
抗拉強度(Tensile Strength)	70	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	7	%	ISO 527-1/-2
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	6	kJ/m2	ISO 179/1eA
彎曲彈性模量(Flexural modulus) (23°C)	4000	MPa	ISO 178

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	155	°C	ISO 306
Burning behav. at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6	mm	IEC 60695-11-10

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
密度(Density)	1480	kg/m3	ISO 1183

CharacteristicsProcessingInjection MoldingDelivery formGranulesFeaturesCopolymerRegional AvailabilityEurope, Asia PacificDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

關鍵詞:
POLYform POM C M90 GF10|POM-GF10|Polykemi