国产三级精品三级在线专区1,欧美性猛交xxxx乱大交丰满,国产精品香蕉在线观看不卡,国产成年码av片在线观看,欧美gv在线

POLYform POM C M20|POM|Polykemi

POLYform POM C M20|POM|Polykemi 物性表: POLYform POM C M20|POM|Polykemi物性表及特性介紹,POLYform POM C M20|POM|Polykemi注塑參數詳情,如需POLYform POM C M20|POM|Polykemi下載, 可到相關下載區下載

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
成型收縮(Molding shrinkage) (parallel)	1.9	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	1.9	%	ISO 294-4, 2577
熔體流動指數(熔體流動指數(Melt flow index)) (MFI)	2	g/10min	ISO 1133
MFI溫度(MFI temperature)	190	°C	ISO 1133
MFI負載(MFI load)	2.16	kg	ISO 1133

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
拉伸模量(Tensile Modulus)	2400	MPa	ISO 527-1/-2
抗拉強度(Tensile Strength)	60	MPa	ISO 527-1/-2
屈服應變(Yield strain)	14	%	ISO 527-1/-2
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	8	kJ/m2	ISO 179/1eA
彎曲彈性模量(Flexural modulus) (23°C)	2100	MPa	ISO 178

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	110	°C	ISO 75-1/-2
Vicat softening temperature A	163	°C	ISO 306
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	150	°C	ISO 306

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
密度(Density)	1410	kg/m3	ISO 1183

CharacteristicsProcessingInjection MoldingDelivery formGranulesFeaturesCopolymerRegional AvailabilityEurope, Asia PacificDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

關鍵詞:
POLYform POM C M20|POM|Polykemi