亚洲国产成人av在线观看,久久这里只有精品免费首页,丝袜欧美视频首页在线,久久婷婷五月综合色99啪ak,国产精品亚洲а∨天堂2021

POLIFORM H100ST1|POM|Aquafil Technopolymers

POLIFORM H100ST1|POM|Aquafil Technopolymers 物性表: POLIFORM H100ST1|POM|Aquafil Technopolymers物性表及特性介紹,POLIFORM H100ST1|POM|Aquafil Technopolymers注塑參數詳情,如需POLIFORM H100ST1|POM|Aquafil Technopolymers下載, 可到相關下載區下載

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
熔體流動指數(熔體流動指數(Melt flow index)) (MFI)	9	g/10min	ISO 1133
MFI溫度(MFI temperature)	190	°C	ISO 1133
MFI負載(MFI load)	2.16	kg	ISO 1133

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
拉伸模量(Tensile Modulus)	2000	MPa	ISO 527-1/-2
屈服應力(Yield stress)	55	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	>50	%	ISO 527-1/-2
懸臂梁式?jīng)_擊切口 (23°C)	10	kJ/m2	ISO 180/1A

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	177	°C	ISO 11357-1/-3
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	135	°C	ISO 306
燃燒性厚度(Burning behav. at thickness h)	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	0.8	mm	IEC 60695-11-10

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
體積電阻率(Volume resistivity)	1E11	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	1E16	Ohm	IEC 60093

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
密度(Density)	1390	kg/m3	ISO 1183

CharacteristicsProcessingInjection MoldingSpecial CharacteristicsHigh impact or impact modifiedFeaturesHomopolymerRegional AvailabilityNorth America, Europe, Asia PacificDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

關鍵詞:
POLIFORM H100ST1|POM|Aquafil Technopolymers