欧美黑人性暴力猛交在线视频 ,国产特级毛片aaaaaa高清,手机在线看片不卡中文字幕,免费看欧美日韩一区二区三区,思思久99久女女精品

POLIFORM C100G30|POM-GF30|Aquafil Technopolymers

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
成型收縮(Molding shrinkage) (parallel)	0.7	%	ISO 294-4, 2577
熔體流動指數(熔體流動指數(Melt flow index)) (MFI)	7	g/10min	ISO 1133
MFI溫度(MFI temperature)	190	°C	ISO 1133
MFI負載(MFI load)	2.16	kg	ISO 1133

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
拉伸模量(Tensile Modulus)	9000	MPa	ISO 527-1/-2
破壞時應變(Stress at break)	135	MPa	ISO 527-1/-2
懸臂梁式沖擊切口 (23°C)	8	kJ/m2	ISO 180/1A

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	166	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	160	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	155	°C	ISO 306
燃燒性厚度(Burning behav. at thickness h)	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	0.8	mm	IEC 60695-11-10

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
體積電阻率(Volume resistivity)	1E10	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	1E14	Ohm	IEC 60093

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
吸水率(Water absorption)	0.8	%	Sim. to ISO 62
密度(Density)	1600	kg/m3	ISO 1183

CharacteristicsProcessingInjection MoldingFeaturesCopolymerRegional AvailabilityNorth America, Europe, Asia PacificDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

關鍵詞:
POLIFORM C100G30|POM-GF30|Aquafil Technopolymers