国产内射性高湖,天堂mv在线mv免费mv香蕉,亚洲欧美激情在线一区,日韩最新中文字幕,亚洲a人片在线观看网址

NIFORM 130|POM|Soredi

NIFORM 130|POM|Soredi 物性表: NIFORM 130|POM|Soredi物性表及特性介紹,NIFORM 130|POM|Soredi注塑參數詳情,如需NIFORM 130|POM|Soredi下載, 可到相關下載區下載

加工/物理特性	值(Value)	單位(Unit)	測試標準(Test Standard)
ASTM數據(ASTM Data)
熔體流動指數(Melt Flow Index)	13	g/10min	ASTM D 1238
溫度(Temperature)	190	°C	-
負載(Load)	2.16	kg	-
模具收縮(Mold Shrinkage) (MD)	0.0265	mm/mm	ASTM D 955
密度(Density) (73°F)	1410	kg/m3	ASTM D 792

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ASTM數據(ASTM Data)
抗拉強度(Tensile Strength) at Yield	63	MPa	ASTM D 638
彎曲彈性模量(彎曲彈性模量(Flexural Modulus))	2600	MPa	ASTM D 790
抗彎強度(Flexural Strength)	85	MPa	ASTM D 790
懸臂梁式沖擊切口 (1/8 in)	0.0673	kJ/m	ASTM D 256
懸臂梁式沖擊切口 (Low-溫度(Temperature))	0.048	kJ/m	ASTM D 256
溫度(Temperature)	-20	°C	ASTM D 256

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	110	E-6/K	ISO 11359-1/-2
ASTM數據(ASTM Data)
UL 94 阻燃等級(Flame rating)	HB	-	UL 94
厚度測試(Thickness tested)	1.6	mm	-
DTUL @ 264 psi	115	°C	ASTM D 648
Vicat 溫度(Temperature)	150	°C	ASTM D 1525

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
相對介電常數(Relative permittivity) (1MHz)	3.7	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	200	E-4	IEC 60250
體積電阻率(Volume resistivity)	1E12	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	1E15	Ohm	IEC 60093
電氣強度(Electric strength)	19	kV/mm	IEC 60243-1

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
吸濕性(Humidity absorption)	0.4	%	Sim. to ISO 62

CharacteristicsProcessingInjection MoldingFeaturesCopolymerApplicationsGeneral PurposeRegional AvailabilityEuropeDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

關鍵詞:
NIFORM 130|POM|Soredi