无码国产欧美一区二区三区不卡,忍着娇喘人妻被中出中文字幕,伊人久在线观看视频,国产免费福利网站,国产日产亚洲系列av

LUCEL N109LDS|POM|LG Chem

LUCEL N109LDS|POM|LG Chem 物性表: LUCEL N109LDS|POM|LG Chem物性表及特性介紹,LUCEL N109LDS|POM|LG Chem注塑參數詳情,如需LUCEL N109LDS|POM|LG Chem下載, 可到相關下載區(qū)下載

加工/物理特性	值(Value)	單位(Unit)	測試標準(Test Standard)
ASTM數據(ASTM Data)
熔體流動指數(Melt Flow Index)	13	g/10min	ASTM D 1238
溫度(Temperature)	190	°C	-
負載(Load)	2.16	kg	-
模具收縮(Mold Shrinkage) (MD)	0.0195	mm/mm	ASTM D 955
密度(Density) (73°F)	1410	kg/m3	ASTM D 792

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ASTM數據(ASTM Data)
抗拉強度(Tensile Strength) at Yield	61.3	MPa	ASTM D 638
斷裂伸長率(Elongation at Break)	60	%	ASTM D 638
彎曲彈性模量(彎曲彈性模量(Flexural Modulus))	2550.6	MPa	ASTM D 790
抗彎強度(Flexural Strength)	90.3	MPa	ASTM D 790
洛氏硬度(Rockwell Hardness)	R 82	-	ASTM D 785
懸臂梁式沖擊切口 (1/4 in)	0.0613	kJ/m	ASTM D 256

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ASTM數據(ASTM Data)
絕緣強度(Dielectric Strength) (Short Time)	24	kV/mm	ASTM D 149
耗散因數(Dissipation Factor) (1 MHz)	3.8	-	ASTM D 150
表面電阻率(Surface Resistivity)	>1E15	Ohm	ASTM D 257
體積電阻率(Volume Resistivity)	1E14	Ohm*cm	ASTM D 257

CharacteristicsProcessingInjection MoldingDelivery formPelletsFeaturesLow OdorChemical ResistanceGeneral Chemical ResistanceRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central AmericaDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

關鍵詞:
LUCEL N109LDS|POM|LG Chem