一本色道婷婷久久欧美,国内自拍小视频在线看,中文字幕久久精品波多野结,这里只有精品免费视频,国产一区二区高潮视频

LUCEL N145LD|POM|LG Chem

LUCEL N145LD|POM|LG Chem 物性表: LUCEL N145LD|POM|LG Chem物性表及特性介紹,LUCEL N145LD|POM|LG Chem注塑參數詳情,如需LUCEL N145LD|POM|LG Chem下載, 可到相關下載區下載

加工/物理特性	值(Value)	單位(Unit)	測試標準(Test Standard)
ASTM數據(ASTM Data)
熔體流動指數(Melt Flow Index)	45	g/10min	ASTM D 1238
溫度(Temperature)	190	°C	-
負載(Load)	2.16	kg	-
模具收縮(Mold Shrinkage) (MD)	0.0195	mm/mm	ASTM D 955
密度(Density) (73°F)	1410	kg/m3	ASTM D 792

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ASTM數據(ASTM Data)
抗拉強度(Tensile Strength) at Yield	62.3	MPa	ASTM D 638
斷裂伸長率(Elongation at Break)	50	%	ASTM D 638
彎曲彈性模量(彎曲彈性模量(Flexural Modulus))	2648.71	MPa	ASTM D 790
抗彎強度(Flexural Strength)	93.2	MPa	ASTM D 790
洛氏硬度(Rockwell Hardness)	R 82	-	ASTM D 785
懸臂梁式?jīng)_擊切口 (1/4 in)	0.0518	kJ/m	ASTM D 256

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ASTM數據(ASTM Data)
UL 94 阻燃等級(Flame rating)	HB	-	UL 94
厚度測試(Thickness tested)	0.71	mm	-

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ASTM數據(ASTM Data)
絕緣強度(Dielectric Strength) (Short Time)	24	kV/mm	ASTM D 149
耗散因數(Dissipation Factor) (1 MHz)	3.8	-	ASTM D 150
表面電阻率(Surface Resistivity)	>1E15	Ohm	ASTM D 257
體積電阻率(Volume Resistivity)	1E14	Ohm*cm	ASTM D 257

CharacteristicsProcessingInjection MoldingDelivery formPelletsFeaturesLow OdorChemical ResistanceGeneral Chemical ResistanceApplicationsAutomotive, Electrical and ElectronicalRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central AmericaDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

關鍵詞:
LUCEL N145LD|POM|LG Chem