国产成人啪精品午夜网站,亚洲高清无在码在线无弹窗,国产福利免费在线观看,中文字幕日韩熟女av,99久久精品久久久久久婷婷

KEBAFORM C 130.2|POM|Barlog

KEBAFORM C 130.2|POM|Barlog 物性表: KEBAFORM C 130.2|POM|Barlog物性表及特性介紹,KEBAFORM C 130.2|POM|Barlog注塑參數詳情,如需KEBAFORM C 130.2|POM|Barlog下載, 可到相關下載區下載

2 | POM |Barlog

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
成型收縮(Molding shrinkage) (parallel)	2.0	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	2.0	%	ISO 294-4, 2577
熔體流動指數(熔體流動指數(Melt flow index)) (MFI)	14	g/10min	ISO 1133
MFI溫度(MFI temperature)	190	°C	ISO 1133
MFI負載(MFI load)	2.16	kg	ISO 1133

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
拉伸模量(Tensile Modulus)	2900	MPa	ISO 527-1/-2
屈服應力(Yield stress)	65	MPa	ISO 527-1/-2
屈服應變(Yield strain)	8	%	ISO 527-1/-2
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	6	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	166	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	110	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	160	°C	ISO 75-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	120	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	120	E-6/K	ISO 11359-1/-2
燃燒性厚度(Burning behav. at thickness h)	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	0.8	mm	IEC 60695-11-10
UL 識別(recognition)	UL	-	-

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
體積電阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	>1E15	Ohm	IEC 60093

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
吸濕性(Humidity absorption)	0.22	%	Sim. to ISO 62
密度(Density)	1410	kg/m3	ISO 1183

CharacteristicsFeaturesCopolymerRegional AvailabilityEuropeDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

關鍵詞:
KEBAFORM C 130.2|POM|Barlog