久久一日本综合色鬼综合色 ,国产精品18久久久久久麻辣,欧美亚洲综合成人A∨在线,亚洲精品久久久久国色天香,影音先锋大黄瓜视频

Iupital V20-HT|POM|Mitsubishi EP

Iupital V20-HT|POM|Mitsubishi EP 物性表: Iupital V20-HT|POM|Mitsubishi EP物性表及特性介紹,Iupital V20-HT|POM|Mitsubishi EP注塑參數詳情,如需Iupital V20-HT|POM|Mitsubishi EP下載, 可到相關下載區下載

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
成型收縮(Molding shrinkage) (parallel)	1.9	%	ISO 294-4, 2577
熔體流動指數(熔體流動指數(Melt flow index)) (MFI)	11	g/10min	ISO 1133
MFI溫度(MFI temperature)	190	°C	ISO 1133
MFI負載(MFI load)	2.16	kg	ISO 1133

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
拉伸模量(Tensile Modulus)	1700	MPa	ISO 527-1/-2
屈服應力(Yield stress)	42	MPa	ISO 527-1/-2
屈服應變(Yield strain)	7	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	57	%	ISO 527-1/-2
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	5	kJ/m2	ISO 179/1eA
彎曲彈性模量(Flexural modulus) (23°C)	1700	MPa	ISO 178

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	84	°C	ISO 75-1/-2

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
表面電阻率(Surface resistivity)	1E13	Ohm	IEC 60093

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
密度(Density)	1380	kg/m3	ISO 1183

CharacteristicsRegional AvailabilityNorth America, Europe, Asia PacificDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

關鍵詞:
Iupital V20-HT|POM|Mitsubishi EP