夜夜添无码一区二区三区,老司机aⅴ在线精品导航,一本色道久久加勒比综合,麻豆一区二区三区精品视频,青草青草久热精品视频在线播放

HOSTAFORM MR130ACS|POM|Ticona

HOSTAFORM MR130ACS|POM|Ticona 物性表: HOSTAFORM MR130ACS|POM|Ticona物性表及特性介紹,HOSTAFORM MR130ACS|POM|Ticona注塑參數詳情,如需HOSTAFORM MR130ACS|POM|Ticona下載, 可到相關下載區下載

Product TextsHostaform? acetal copolymer grade MR130ACS is a general purpose acetal Hostaform? MR130ACS demonstrates

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔體體積流動速率(Melt volume-flow rate) (MVR)	12	cm3/10min	ISO 1133
溫度(Temperature)	190	°C	ISO 1133
負載(Load)	2.16	kg	ISO 1133

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	2900	MPa	ISO 527-1/-2
屈服應力(Yield stress)	62	MPa	ISO 527-1/-2
屈服應變(Yield strain)	11	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	30	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	150	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	140	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	8	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	6	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	170	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	100	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	154	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	94	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	100	E-6/K	ISO 11359-1/-2

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	1.7	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.3	%	Sim. to ISO 62
密度(Density)	1410	kg/m3	ISO 1183

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Processing conditions acc. ISO	9990	-	ISO ....-2

CharacteristicsProcessingInjection MoldingDelivery formPelletsAdditivesRelease agentRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING 40 mm Water content 0,2%g. moisturizing is not necessary.DisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

關鍵詞:
HOSTAFORM MR130ACS|POM|Ticona