在线免费观看亚洲天堂av,91精品国产免费人成网站,五月婷之久久综合丝袜美腿,久久永久视频,欧美三级中文字幕在线观看

HOSTAFORM C 27021 GV3/30|POM-GB30|Ticona

Product TextsChemical abbreviation according to ISO 1043-1: POM16

ISO 1133

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	3800	MPa	ISO 527-1/-2
屈服應力(Yield stress)	38	MPa	ISO 527-1/-2
屈服應變(Yield strain)	6	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	12	%	ISO 527-1/-2
Tensile creep modulus (1h)	3300	MPa	ISO 899-1
Tensile creep modulus (1000h)	2100	MPa	ISO 899-1
簡支梁沖擊強度(Charpy impact strength) (+23°C)	30	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	30	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	2.5	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	3	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	166	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	112	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	151	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	80	E-6/K	ISO 11359-1/-2

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	5	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	4.5	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	300	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	80	E-4	IEC 60250
體積電阻率(Volume resistivity)	1E12	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	1E14	Ohm	IEC 60093
電氣強度(Electric strength)	40	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	600	-	IEC 60112

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.9	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.12	%	Sim. to ISO 62
密度(Density)	1590	kg/m3	ISO 1183

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Processing conditions acc. ISO	9990	-	ISO ....-2
Injection Molding, melt temperature	205	°C	ISO 294
Injection Molding, mold temperature	90	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294
Injection Molding, pressure at hold	90	MPa	ISO 294

Diagrams 40 mm Water content 0,2%g. moisturizing is not necessary.DisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
[/td][/tr][/table]

關鍵詞:
HOSTAFORM C 27021 GV3/30|POM-GB30|Ticona