国产综合色精品一区二区三区,日韩精品国产二区三区,丰满少妇又爽又紧又丰满在线观看 ,亚洲国产成人av国产自,波多野结衣高清一区二区三区

Product TextsISO 18064 : TPC-ET In addition, it resists many industrial chemicals, oils and solvents. Special grades include heat stabilised, flame retardant, food contact compliant, blow molding and extrusion grades. Concentrates offered If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-24 kJ/g of base polymer) in appropriately equipped installations.It contains a non-discoloring stabilizer. It is recommended for extrusion and compounding.3	g/10min	ASTM D 1238
溫度(Temperature)	190	°C	-
負載(Load)	2.16	kg	-
模具收縮(Mold Shrinkage) (MD)	0.005	mm/mm	ASTM D 955
密度(Density) (73°F)	1170	kg/m3	ASTM D 792
吸水率(Water Absorption) (24hr)	0.6	%	ASTM D 570

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔體體積流動速率(Melt volume-flow rate) (MVR)	5	cm3/10min	ISO 1133
溫度(Temperature)	190	°C	ISO 1133
負載(Load)	2.16	kg	ISO 1133
成型收縮(Molding shrinkage) (parallel)	0.5	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	0.5	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	55	MPa	ISO 527-1/-2
Stress at 50% strain	7.5	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	>50	%	ISO 527-1/-2
Tensile creep modulus (1h)	50	MPa	ISO 899-1
Tensile creep modulus (1000h)	40	MPa	ISO 899-1
簡支梁沖擊強度(Charpy impact strength) (+23°C)	N	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	N	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	N	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	N	kJ/m2	ISO 179/1eA
Tensile notched impact strength (+23°C)	230	kJ/m2	ISO 8256/1
Stress at 10% elongation	4.2	MPa	ISO 527-1/-2
Stress at 100% elongation	27	MPa	ISO 527-1/-2
破壞時應變(Strain at break) TPE	>300	%	ISO 527-1/-2
破壞時應變(Stress at break) TPE	30	MPa	ISO 527-1/-2
抗拉強度(撕裂強度(Tear strength))	101	kN/m	ISO 34-1
Abrasion resistance	200	mm3	ISO 4649
Shore D hardness (15s)	39	-	ISO 868
ASTM數據(ASTM Data)
抗拉強度(Tensile Strength) at Break	21	MPa	ASTM D 638
斷裂伸長率(Elongation at Break)	700	%	ASTM D 638
彎曲彈性模量(彎曲彈性模量(Flexural Modulus))	62	MPa	ASTM D 790
Shore D Hardness	40	-	ASTM D 2240
懸臂梁式沖擊切口 (1/8 in)	N	kJ/m	ASTM D 256
懸臂梁式沖擊切口 (Low-溫度(Temperature))	N	kJ/m	ASTM D 256
溫度(Temperature)	-40	°C	ASTM D 256

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	150	°C	ISO 11357-1/-3
玻璃化轉變溫度(Glass transition temperature) (10°C/min)	-40	°C	ISO 11357-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	50	°C	ISO 75-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	220	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	220	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.5	mm	IEC 60695-11-10
UL 識別(recognition)	UL	-	-
Oxygen index	20	%	ISO 4589-1/-2
ASTM數據(ASTM Data)
UL 94 阻燃等級(Flame rating)	HB	-	UL 94
厚度測試(Thickness tested)	1.5	mm	-
熱膨脹系數(Coefficient of Thermal Expansion) (MD)	130	E-6/K	ASTM D 696
熱膨脹系數(Coefficient of Thermal Expansion) (TD)	160	E-6/K	ASTM D 696
DTUL @ 66 psi	54	°C	ASTM D 648
熔化溫度(Melting 溫度(Temperature))	150	°C	ASTM D 3418

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	5.2	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	4.7	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	110	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	525	E-4	IEC 60250
體積電阻率(Volume resistivity)	7E10	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	2E14	Ohm	IEC 60093
電氣強度(Electric strength)	18	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	600	-	IEC 60112
ASTM數據(ASTM Data)
絕緣強度(Dielectric Strength) (Short Time)	16.1	kV/mm	ASTM D 149
耗散因數(Dissipation Factor) (1 MHz)	0.06	-	ASTM D 150
介電常數(Dielectric Constant) (1 MHz)	4.6	-	ASTM D 150

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.7	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.2	%	Sim. to ISO 62
密度(Density)	1150	kg/m3	ISO 1183

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
密度(Density) of melt	1020	kg/m3	-
Eff. thermal diffusivity	5.44E-8	m2/s	-

DiagramsEng.Oil, ISP (140°C)[/td][/tr][tr][td] ISO 1817 Liquid C) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid 4) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (90°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (>90°C)[/td][/tr][tr][td]Salt solutions[/td][/tr][tr][td] 4 Brake fluid (130°C)[/td][/tr][tr][td] .
[/td][/tr][/table]

Hytrel? 4056|TPC|DuPont