夜夜添无码试看一区二区三区,日韩av爽爽爽久久久久久 ,老司机性色福利精品视频,插插射啊爱视频日a级,麻豆果冻国产剧情av在线播放

Product TextsISO 18064 : TPC-ET In addition, it resists many industrial chemicals, oils and solvents. Special grades include heat stabilised, flame retardant, food contact compliant, blow molding and extrusion grades. Concentrates offered If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-24 kJ/g of base polymer) in appropriately equipped installations.It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.16	kg	-
密度(Density) (73°F)	1070	kg/m3	ASTM D 792
吸水率(Water Absorption) (24hr)	0.8	%	ASTM D 570

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔體體積流動速率(Melt volume-flow rate) (MVR)	5	cm3/10min	ISO 1133
溫度(Temperature)	190	°C	ISO 1133
負載(Load)	2.16	kg	ISO 1133
成型收縮(Molding shrinkage) (parallel)	0.6	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	0.7	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	25	MPa	ISO 527-1/-2
Stress at 50% strain	5	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	>50	%	ISO 527-1/-2
Tensile creep modulus (1h)	22	MPa	ISO 899-1
Tensile creep modulus (1000h)	18	MPa	ISO 899-1
簡支梁沖擊強度(Charpy impact strength) (+23°C)	N	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	N	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	N	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	N	kJ/m2	ISO 179/1eA
Stress at 10% elongation	1.8	MPa	ISO 527-1/-2
破壞時應變(Strain at break) TPE	>300	%	ISO 527-1/-2
破壞時應變(Stress at break) TPE	24	MPa	ISO 527-1/-2
抗拉強度(撕裂強度(Tear strength))	80	kN/m	ISO 34-1
ASTM數據(ASTM Data)
抗拉強度(Tensile Strength) at Break	26.2	MPa	ASTM D 638
斷裂伸長率(Elongation at Break)	700	%	ASTM D 638
彎曲彈性模量(彎曲彈性模量(Flexural Modulus))	28	MPa	ASTM D 790
Shore D Hardness	30	-	ASTM D 2240
懸臂梁式沖擊切口 (1/8 in)	N	kJ/m	ASTM D 256
懸臂梁式沖擊切口 (Low-溫度(Temperature))	N	kJ/m	ASTM D 256
溫度(Temperature)	-40	°C	ASTM D 256

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	165	°C	ISO 11357-1/-3
玻璃化轉變溫度(Glass transition temperature) (10°C/min)	-60	°C	ISO 11357-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	180	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	210	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.5	mm	IEC 60695-11-10
UL 識別(recognition)	UL	-	-
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	3.0	mm	IEC 60695-11-10
UL 識別(recognition)	UL	-	-
Oxygen index	19	%	ISO 4589-1/-2
ASTM數據(ASTM Data)
UL 94 阻燃等級(Flame rating)	HB	-	UL 94
厚度測試(Thickness tested)	1.5	mm	-
熱膨脹系數(Coefficient of Thermal Expansion) (MD)	180	E-6/K	ASTM D 696
熱膨脹系數(Coefficient of Thermal Expansion) (TD)	210	E-6/K	ASTM D 696
DTUL @ 66 psi	46	°C	ASTM D 648
熔化溫度(Melting 溫度(Temperature))	170	°C	ASTM D 3418

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	4.9	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	4.8	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	70	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	125	E-4	IEC 60250
體積電阻率(Volume resistivity)	9E10	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	2E14	Ohm	IEC 60093
電氣強度(Electric strength)	18	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	600	-	IEC 60112

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.8	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.2	%	Sim. to ISO 62
密度(Density)	1070	kg/m3	ISO 1183

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
密度(Density) of melt	940	kg/m3	-
熔體熱導率(Thermal conductivity of melt)	0.15	W/(m K)	-
規格的熱容融化(Spec. heat capacity of melt)	2150	J/(kg K)	-
Eff. thermal diffusivity	5.44E-8	m2/s	-
噴射溫度(Ejection temperature)	55	°C	-

Diagrams ISO 1817 Liquid C) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid 4) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (90°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (>90°C)[/td][/tr][tr][td]Salt solutions[/td][/tr][tr][td] 4 Brake fluid (130°C)[/td][/tr][tr][td] .
[/td][/tr][/table]

Hytrel? 3078|TPC|DuPont