男人进女人下部全黄大色视频,综合久久婷婷综合久久,高清无码在线视频,无码国产精品一区二区免费3p ,V一区无码内射国产

Product TextsVESTAKEEP? L 4000 G1	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	1.8	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	3500	MPa	ISO 527-1/-2
屈服應力(Yield stress)	96	MPa	ISO 527-1/-2
屈服應變(Yield strain)	5	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	30	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	N	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	N	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	7	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	6	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	340	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	155	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	205	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	305	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	60	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	V-0	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6	mm	IEC 60695-11-10
Oxygen index	38	%	ISO 4589-1/-2

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	2.8	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	2.8	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	50	E-4	IEC 60250
體積電阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	1E15	Ohm	IEC 60093
相比漏電起痕指數(Comparative tracking index)	200	-	IEC 60112

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.5	%	Sim. to ISO 62
密度(Density)	1300	kg/m3	ISO 1183

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔體熱導率(Thermal conductivity of melt)	0.18	W/(m K)	-
規格的熱容融化(Spec. heat capacity of melt)	2110	J/(kg K)	-

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	370	°C	ISO 294
Injection Molding, mold temperature	180	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294
Injection Molding, pressure at hold	120	MPa	ISO 294

Diagrams25 %The drying time is dependent on theIn practice a drying time of 2 - 3 hours at a temperature of 150 - 160 °C (depen- With the exeption of 25 %The drying time is dependent on theIn practice a drying time of 2 - 3 hours at a temperature of 150 - 160 °C (depen- With the exeption of 25 %The drying time is dependent on theIn practice a drying time of 2 - 3 hours at a temperature of 150 - 160 °C (depen- With the exeption ofISO 1817 Liquid C) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid 4) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td]Salt solutions[/td][/tr][tr][td] .
[/td][/tr][/table]

VESTAKEEP? L 4000 G|PEEK|Evonik Industries