中文字幕日韩欧美就去鲁,无码国内精品人妻少妇,一本久久a久久精品亚洲,亚洲乱码日产精品bd在线,国产一区二区视频啪啪视频

VESTAKEEP? 4000 GF30|PEEK-GF30|Evonik Industries

Product TextsVESTAKEEP? 4000 GF30 Parts made from VESTAKEEP? 4000 GF30 are self-extinguishing.4	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	0.7	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	11000	MPa	ISO 527-1/-2
破壞時應變(Stress at break)	165	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	2	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	70	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	75	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	10	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	9	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	340	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	312	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	335	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	335	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	30	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	V-0	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6	mm	IEC 60695-11-10
燃燒性(球壓痕硬度(Burning behav)). at thickness h	V-1	class	IEC 60695-11-10
厚度測試(Thickness tested)	0.8	mm	IEC 60695-11-10
Oxygen index	45	%	ISO 4589-1/-2

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	3.3	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	3.3	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	40	E-4	IEC 60250
體積電阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	1E15	Ohm	IEC 60093
相比漏電起痕指數(Comparative tracking index)	200	-	IEC 60112

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.4	%	Sim. to ISO 62
密度(Density)	1500	kg/m3	ISO 1183

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	380	°C	ISO 294
Injection Molding, mold temperature	180	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294
Injection Molding, pressure at hold	120	MPa	ISO 294

Diagrams25 %The drying time is dependent on theIn practice a drying time of 2 - 3 hours at a temperature of 150 - 160 °C (depen- With the exeption ofISO 1817 Liquid C) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid 4) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td]Salt solutions[/td][/tr][tr][td] .
[/td][/tr][/table]

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-103004.html

免責聲明: 本文 VESTAKEEP? 4000 GF30|PEEK-GF30|Evonik Industries 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡