久久久久久久一线毛片,国内在线视频一区二区三区,玖玖在线精品免费视频,啊┅┅快┅┅用力啊岳网站,精品无码老熟妇magnet

Product TextsInjection moulding grade with enhanced toughness and resistance to heat distortion. Especially suitable for exterior automotive components (eg radiator grills, rear end applique panels and mirror housings).

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔體體積流動速率(Melt volume-flow rate) (MVR)	5	cm3/10min	ISO 1133
溫度(Temperature)	220	°C	ISO 1133
負載(Load)	10	kg	ISO 1133
成型收縮(Molding shrinkage) (parallel)	0.5	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	0.9	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	2500	MPa	ISO 527-1/-2
屈服應力(Yield stress)	54	MPa	ISO 527-1/-2
屈服應變(Yield strain)	3.4	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	8	%	ISO 527-1/-2
Tensile creep modulus (1000h)	1250	MPa	ISO 899-1
簡支梁沖擊強度(Charpy impact strength) (+23°C)	250	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	90	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	15	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	4	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	103	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	106	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	104	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	95	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6	mm	IEC 60695-11-10
UL 識別(recognition)	UL	-	-
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	0.8	mm	IEC 60695-11-10
UL 識別(recognition)	UL	-	-
Oxygen index	19	%	ISO 4589-1/-2

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	3.9	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	3.5	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	90	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	330	E-4	IEC 60250
體積電阻率(Volume resistivity)	1E12	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	1E13	Ohm	IEC 60093
電氣強度(Electric strength)	35	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	600	-	IEC 60112

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	1.65	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.35	%	Sim. to ISO 62
密度(Density)	1070	kg/m3	ISO 1183

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔體熱導率(Thermal conductivity of melt)	0.16	W/(m K)	-
規格的熱容融化(Spec. heat capacity of melt)	2000	J/(kg K)	-
噴射溫度(Ejection temperature)	95	°C	-

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	250	°C	ISO 294
Injection Molding, mold temperature	60	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294

DiagramsV. stabilized or stable to weather, Heat stabilized or stable to heatRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING .

Luran? S 778 T|ASA|Styrolution