夜色福利站WWW国产在线视频,国产11一12周岁女毛片,成人国产精品中文字幕,国产精品推荐手机在线,自拍视频在线观看成人

Product TextsEasy flowing injection moulding grade with good toughness and heat distortion resistance.

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔體體積流動速率(Melt volume-flow rate) (MVR)	15	cm3/10min	ISO 1133
溫度(Temperature)	220	°C	ISO 1133
負載(Load)	10	kg	ISO 1133
成型收縮(Molding shrinkage) (parallel)	0.5	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	0.9	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	2300	MPa	ISO 527-1/-2
屈服應力(Yield stress)	48	MPa	ISO 527-1/-2
屈服應變(Yield strain)	3.3	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	9	%	ISO 527-1/-2
Tensile creep modulus (1h)	1850	MPa	ISO 899-1
Tensile creep modulus (1000h)	1400	MPa	ISO 899-1
簡支梁沖擊強度(Charpy impact strength) (+23°C)	250	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	90	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	17	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	4	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	97	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	101	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	97	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	95	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6	mm	IEC 60695-11-10
UL 識別(recognition)	UL	-	-
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	0.8	mm	IEC 60695-11-10
UL 識別(recognition)	UL	-	-
Oxygen index	19	%	ISO 4589-1/-2

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	3.7	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	3.4	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	110	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	240	E-4	IEC 60250
體積電阻率(Volume resistivity)	1E12	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	1E13	Ohm	IEC 60093
電氣強度(Electric strength)	35	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	600	-	IEC 60112

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	1.65	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.35	%	Sim. to ISO 62
密度(Density)	1070	kg/m3	ISO 1183

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔體熱導率(Thermal conductivity of melt)	0.16	W/(m K)	-
規格的熱容融化(Spec. heat capacity of melt)	1860	J/(kg K)	-
噴射溫度(Ejection temperature)	95	°C	-

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	250	°C	ISO 294
Injection Molding, mold temperature	60	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294

DiagramsV. stabilized or stable to weather, Heat stabilized or stable to heatRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING .

Luran? S 777 K SPF 30|ASA|Styrolution