| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.25 g/cc | 0.0452 lb/in³ | |||
| Filler Content | 20 % | 20 % | |||
| Water Absorption | 0.22 % | 0.22 % | 24 hrs., 50% RH | ||
| Linear Mold Shrinkage, Flow | 0.0030 - 0.0060 cm/cm | 0.0030 - 0.0060 in/in | |||
| Linear Mold Shrinkage, Transverse | 0.0050 - 0.0080 cm/cm | 0.0050 - 0.0080 in/in | |||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength at Break | 150 MPa | 21800 psi | |||
| Elongation at Break | 2.9 % | 2.9 % | |||
| Tensile Modulus | 7.30 GPa | 1060 ksi | |||
| Flexural Yield Strength | 215 MPa | 31200 psi | |||
| Flexural Modulus | 6.70 GPa | 972 ksi | |||
| Izod Impact, Notched (ISO) | 8.00 kJ/m² | 3.81 ft-lb/in² | |||
| Izod Impact, Unnotched (ISO) | 45.0 kJ/m² | 21.4 ft-lb/in² | |||
| Charpy Impact Unnotched | 5.50 J/cm² | 26.2 ft-lb/in² | |||
| Charpy Impact, Notched | 0.900 J/cm² | 4.28 ft-lb/in² | |||
| Electrical Properties | Metric | English | Comments | ||
| Electrical Resistivity | 3.10e+15 ohm-cm | 3.10e+15 ohm-cm | |||
| Dielectric Constant | 3.1 | 3.1 | |||
| Dielectric Strength | 25.0 kV/mm | 635 kV/in | ASTM D145 | ||
| Dissipation Factor | 0.034 | 0.034 | IEC 60250 | ||
| Arc Resistance | 120 - 180 sec | 120 - 180 sec | ASTM D495 | ||
| Comparative Tracking Index | 400 - 600 V | 400 - 600 V | IEC 60112 | ||
| Hot Wire Ignition, HWI | 0.00 - 7.0 sec @Thickness 1.50 mm |
0.00 - 7.0 sec @Thickness 0.0591 in |
UL 746A | ||
| High Amp Arc Ignition, HAI | >= 120 arcs @Thickness 1.50 mm |
>= 120 arcs @Thickness 0.0591 in |
UL 746A | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 30.0 µm/m-°C @Temperature -30.0 - 30.0 °C |
16.7 µin/in-°F @Temperature -22.0 - 86.0 °F |
|||
| CTE, linear, Transverse to Flow | 54.0 µm/m-°C | 30.0 µin/in-°F | |||
| Deflection Temperature at 0.46 MPa (66 psi) | 240 °C | 464 °F | |||
| Deflection Temperature at 1.8 MPa (264 psi) | 260 °C | 500 °F | |||
| UL RTI, Electrical | 50.0 °C | 122 °F | UL746B | ||
| UL RTI, Mechanical with Impact | 50.0 °C | 122 °F | UL746B | ||
| UL RTI, Mechanical without Impact | 50.0 °C | 122 °F | UL746B | ||
| Flammability, UL94 | HB @Thickness 0.750 mm |
HB @Thickness 0.0295 in |
|||
| Processing Properties | Metric | English | Comments | ||
| Melt Temperature | 280 - 310 °C | 536 - 590 °F | |||
| Mold Temperature | 50.0 - 80.0 °C | 122 - 176 °F | |||
| Drying Temperature | 80.0 °C | 176 °F | 1 - 3 hrs | ||
| De |
|||||
| Comments | High Ductility | ||||
| Nylon/SPS blend | |||||
.
上海松翰塑化科技有限公司！本公司承諾，假一賠百！所有產品都是原廠家，原包裝一線獨家營銷！
我司所銷售所有產品均為原廠原包，均可提供相關資料報告（如：物性表，MSDS報告，UL報告，COA報告，SGS報告，FDA等）！
歡迎新老客戶來電或QQ咨詢：
聯系人：李生
聯系電話；13636696005
聯系QQ；1020580970
聯系郵箱；1020580970@qq.com