LCP C130M 材料說明：液晶聚合物樹脂：sepaz LCP樹脂具有傳統塑料的一種獨特的結構和性能沒有想到的。在sepaz LCP以優異的綜合性能和成型效率。sepaz LCP具有獨特的屬性，產品變得更薄，更大的機械強度。sepaz LCP連接器發現使用，傳感器和其他電子元件和CD提取部分，在復印機和傳真辦公和視聽設備部件。
LCP C130M 加工方法：注塑成型
LCP C130M 性能表：
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.63 g/cc | 1.63 g/cc | ASTM D792 |
| Linear Mold Shrinkage | 0.00 cm/cm | 0.00 in/in | |
| Linear Mold Shrinkage, Transverse | 0.0050 cm/cm | 0.0050 in/in | |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength | 127.53 MPa | 18497 psi | ASTM D638 |
| Elongation at Break | 4.0 % | 4.0 % | ASTM D638 |
| Flexural Strength | 127.53 MPa | 18497 psi | ASTM D790 |
| Flexural Modulus | 9.6138 GPa | 1394.4 ksi | ASTM D790 |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | >= 1.00e+13 ohm-cm | >= 1.00e+13 ohm-cm | ASTM D257 |
| Surface Resistance | >= 1.00e+15 ohm | >= 1.00e+15 ohm | ASTM D257 |
| Dielectric Constant | 3.2 @Frequency 1.00e+6 Hz |
3.2 @Frequency 1.00e+6 Hz |
ASTM D150 |
| Dielectric Strength | 26.0 kV/mm @Thickness 1.60 mm |
660 kV/in @Thickness 0.0630 in |
ASTM D149 |
| Dissipation Factor | 0.028 @Frequency 1.00e+6 Hz |
0.028 @Frequency 1.00e+6 Hz |
ASTM D150 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 8.00 µm/m-°C @Thickness 1.60 mm |
4.44 µin/in-°F @Thickness 0.0630 in |
ASTM D696 |
| CTE, linear, Transverse to Flow | 22.0 µm/m-°C @Thickness 1.60 mm |
12.2 µin/in-°F @Thickness 0.0630 in |
ASTM D696 |
| Melting Point | 335 °C | 635 °F | ASTM D789 |
| Deflection Temperature at 1.8 MPa (264 psi) | 239 °C | 462 °F | ASTM D648 |
| Flammability, UL94 | V-0 | V-0 | |
如有需求歡迎各位來電咨詢：
聯系人： 夏先生
手 機：13501802636
QQ ：205730283
郵 箱 ：205730283@qq.com
原料圖：（茲圖非實物圖）
