国产区免费精品视频,久久亚洲精品11p,91人妻无码成人精品一区91,国产农村老太xxxxhdxx,国产一级三级三级在线视

參考圖片：

顆粒圖片：

包裝圖片：

成品圖片：
images (5)

Physical Properties	Metric	English	Comments
Density	1.12 g/cc	0.0405 lb/in³
	1.33 g/cc	0.0480 lb/in³	DAM; ISO 1183
Water Absorption	4.5 % @Thickness 2.00 mm	4.5 % @Thickness 0.0787 in	DAM; Sim. to ISO 62
Moisture Absorption	1.50 % @Thickness 2.00 mm	1.50 % @Thickness 0.0787 in	DAM; Sim. to ISO 62
Water Absorption at Saturation	0.85 %	0.85 %	DAM; Immersion 24h; ASTM D570
Viscosity	69805 cP @Shear Rate 5000 1/s, Temperature 305 °C	69805 cP @Shear Rate 5000 1/s, Temperature 581 °F	ISO 11403-1 -2
	88510 cP @Shear Rate 5000 1/s, Temperature 295 °C	88510 cP @Shear Rate 5000 1/s, Temperature 563 °F	ISO 11403-1 -2
	115100 cP @Shear Rate 5000 1/s, Temperature 285 °C	115100 cP @Shear Rate 5000 1/s, Temperature 545 °F	ISO 11403-1 -2
	241800 cP @Shear Rate 500 1/s, Temperature 305 °C	241800 cP @Shear Rate 500 1/s, Temperature 581 °F	ISO 11403-1 -2
	308700 cP @Shear Rate 500 1/s, Temperature 295 °C	308700 cP @Shear Rate 500 1/s, Temperature 563 °F	ISO 11403-1 -2
	403200 cP @Shear Rate 500 1/s, Temperature 285 °C	403200 cP @Shear Rate 500 1/s, Temperature 545 °F	ISO 11403-1 -2
Viscosity Test	160 cm³/g	160 cm³/g	DAM; ISO 307 1157 1628
Linear Mold Shrinkage, Flow	0.0030 cm/cm	0.0030 in/in	DAM; ISO 294-4 2577
Linear Mold Shrinkage, Transverse	0.0070 cm/cm	0.0070 in/in	DAM; ISO 294-4 2577

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	70	70	DAM; ISO 2039-2
Hardness, Rockwell R	110	110	DAM; ISO 2039-2
Tensile Strength at Break	108 MPa	15700 psi	50%RH; ISO 527-1/-2
	146 MPa	21200 psi	DAM; ISO 527-1/-2
Tensile Stress	8.47 MPa @Strain 0.230 %, Temperature 150 °C	1230 psi @Strain 0.230 %, Temperature 302 °F	DAM; ISO 11403-1 -2
	10.7 MPa @Strain 0.240 %, Temperature 90.0 °C	1550 psi @Strain 0.240 %, Temperature 194 °F	50%RH; ISO 11403-1 -2
	11.24 MPa @Strain 0.240 %, Temperature 90.0 °C	1630 psi @Strain 0.240 %, Temperature 194 °F	DAM; ISO 11403-1 -2
	13.42 MPa @Strain 0.420 %, Temperature 150 °C	1946 psi @Strain 0.420 %, Temperature 302 °F	50%RH; ISO 11403-1 -2
	19.37 MPa @Strain 0.330 %, Temperature 40.0 °C	2809 psi @Strain 0.330 %, Temperature 104 °F	50%RH; ISO 11403-1 -2
	26.06 MPa @Strain 0.820 %, Temperature 150 °C	3780 psi @Strain 0.820 %, Temperature 302 °F	DAM; ISO 11403-1 -2
	30.98 MPa @Strain 1.24 %, Temperature 150 °C	4493 psi @Strain 1.24 %, Temperature 302 °F	50%RH; ISO 11403-1 -2
	31.49 MPa @Strain 0.830 %, Temperature 90.0 °C	4567 psi @Strain 0.830 %, Temperature 194 °F	50%RH; ISO 11403-1 -2
	34.96 MPa @Strain 0.310 %, Temperature -40.0 °C	5071 psi @Strain 0.310 %, Temperature -40.0 °F	50%RH; ISO 11403-1 -2
	36.33 MPa @Strain 0.890 %, Temperature 90.0 °C	5269 psi @Strain 0.890 %, Temperature 194 °F	DAM; ISO 11403-1 -2
	41.33 MPa @Strain 0.590 %, Temperature 23.0 °C	5994 psi @Strain 0.590 %, Temperature 73.4 °F	50%RH; ISO 11403-1 -2
	44.4 MPa @Strain 2.51 %, Temperature 150 °C	6440 psi @Strain 2.51 %, Temperature 302 °F	50%RH; ISO 11403-1 -2
	44.82 MPa @Strain 0.510 %, Temperature 40.0 °C	6501 psi @Strain 0.510 %, Temperature 104 °F	DAM; ISO 11403-1 -2
	45.52 MPa @Strain 1.99 %, Temperature 150 °C	6602 psi @Strain 1.99 %, Temperature 302 °F	DAM; ISO 11403-1 -2
	51.14 MPa @Strain 1.03 %, Temperature 40.0 °C	7417 psi @Strain 1.03 %, Temperature 104 °F	50%RH; ISO 11403-1 -2
	53.18 MPa @Strain 4.05 %, Temperature 150 °C	7713 psi @Strain 4.05 %, Temperature 302 °F	50%RH; ISO 11403-1 -2
	53.24 MPa @Strain 1.88 %, Temperature 90.0 °C	7722 psi @Strain 1.88 %, Temperature 194 °F	50%RH; ISO 11403-1 -2
	58.28 MPa @Strain 3.57 %, Temperature 150 °C	8453 psi @Strain 3.57 %, Temperature 302 °F	DAM; ISO 11403-1 -2
	59.6 MPa @Strain 0.710 %, Temperature 0.000 °C	8640 psi @Strain 0.710 %, Temperature 32.0 °F	50%RH; ISO 11403-1 -2
	62.58 MPa @Strain 1.99 %, Temperature 90.0 °C	9076 psi @Strain 1.99 %, Temperature 194 °F	DAM; ISO 11403-1 -2
	67.95 MPa @Strain 3.35 %, Temperature 90.0 °C	9855 psi @Strain 3.35 %, Temperature 194 °F	50%RH; ISO 11403-1 -2
	69.02 MPa @Strain 0.760 %, Temperature 23.0 °C	10010 psi @Strain 0.760 %, Temperature 73.4 °F	DAM; ISO 11403-1 -2
	69.98 MPa @Strain 0.740 %, Temperature -20.0 °C	10150 psi @Strain 0.740 %, Temperature -4.00 °F	50%RH; ISO 11403-1 -2
	76.42 MPa @Strain 1.31 %, Temperature 23.0 °C	11080 psi @Strain 1.31 %, Temperature 73.4 °F	50%RH; ISO 11403-1 -2
	79.23 MPa @Strain 2.10 %, Temperature 40.0 °C	11490 psi @Strain 2.10 %, Temperature 104 °F	50%RH; ISO 11403-1 -2
	81.91 MPa @Strain 3.42 %, Temperature 90.0 °C	11880 psi @Strain 3.42 %, Temperature 194 °F	DAM; ISO 11403-1 -2
	88.29 MPa @Strain 0.870 %, Temperature -40.0 °C	12810 psi @Strain 0.870 %, Temperature -40.0 °F	50%RH; ISO 11403-1 -2
	90.52 MPa @Strain 1.19 %, Temperature 40.0 °C	13130 psi @Strain 1.19 %, Temperature 104 °F	DAM; ISO 11403-1 -2
	90.65 MPa @Strain 0.980 %, Temperature 0.000 °C	13150 psi @Strain 0.980 %, Temperature 32.0 °F	DAM; ISO 11403-1 -2
	96.81 MPa @Strain 3.55 %, Temperature 40.0 °C	14040 psi @Strain 3.55 %, Temperature 104 °F	50%RH; ISO 11403-1 -2
	100.09 MPa @Strain 1.07 %, Temperature -40.0 °C	14517 psi @Strain 1.07 %, Temperature -40.0 °F	DAM; ISO 11403-1 -2
	100.58 MPa @Strain 1.35 %, Temperature 0.000 °C	14588 psi @Strain 1.35 %, Temperature 32.0 °F	50%RH; ISO 11403-1 -2
	104.57 MPa @Strain 2.27 %, Temperature 23.0 °C	15167 psi @Strain 2.27 %, Temperature 73.4 °F	50%RH; ISO 11403-1 -2
	105.95 MPa @Strain 1.16 %, Temperature -20.0 °C	15367 psi @Strain 1.16 %, Temperature -4.00 °F	DAM; ISO 11403-1 -2
	114.59 MPa @Strain 1.47 %, Temperature 23.0 °C	16620 psi @Strain 1.47 %, Temperature 73.4 °F	DAM; ISO 11403-1 -2
	115.64 MPa @Strain 1.36 %, Temperature -20.0 °C	16772 psi @Strain 1.36 %, Temperature -4.00 °F	50%RH; ISO 11403-1 -2
	121.49 MPa @Strain 3.63 %, Temperature 23.0 °C	17621 psi @Strain 3.63 %, Temperature 73.4 °F	50%RH; ISO 11403-1 -2
	127.79 MPa @Strain 2.22 %, Temperature 40.0 °C	18534 psi @Strain 2.22 %, Temperature 104 °F	DAM; ISO 11403-1 -2
	134.54 MPa @Strain 2.17 %, Temperature 0.000 °C	19513 psi @Strain 2.17 %, Temperature 32.0 °F	50%RH; ISO 11403-1 -2
	140.54 MPa @Strain 1.57 %, Temperature -40.0 °C	20384 psi @Strain 1.57 %, Temperature -40.0 °F	50%RH; ISO 11403-1 -2
	142.15 MPa @Strain 1.79 %, Temperature 0.000 °C	20617 psi @Strain 1.79 %, Temperature 32.0 °F	DAM; ISO 11403-1 -2
	143.3 MPa @Strain 4.06 %, Temperature 40.0 °C	20780 psi @Strain 4.06 %, Temperature 104 °F	DAM; ISO 11403-1 -2
	151.92 MPa @Strain 2.49 %, Temperature 23.0 °C	22034 psi @Strain 2.49 %, Temperature 73.4 °F	DAM; ISO 11403-1 -2
	153.48 MPa @Strain 1.89 %, Temperature -20.0 °C	22260 psi @Strain 1.89 %, Temperature -4.00 °F	DAM; ISO 11403-1 -2
	154.85 MPa @Strain 2.14 %, Temperature -20.0 °C	22459 psi @Strain 2.14 %, Temperature -4.00 °F	50%RH; ISO 11403-1 -2
	157.32 MPa @Strain 3.39 %, Temperature 0.000 °C	22817 psi @Strain 3.39 %, Temperature 32.0 °F	50%RH; ISO 11403-1 -2
	158.08 MPa @Strain 1.86 %, Temperature -40.0 °C	22928 psi @Strain 1.86 %, Temperature -40.0 °F	DAM; ISO 11403-1 -2
	181.01 MPa @Strain 3.02 %, Temperature 0.000 °C	26253 psi @Strain 3.02 %, Temperature 32.0 °F	DAM; ISO 11403-1 -2
	185.08 MPa @Strain 3.21 %, Temperature -20.0 °C	26844 psi @Strain 3.21 %, Temperature -4.00 °F	50%RH; ISO 11403-1 -2
	186.91 MPa @Strain 2.46 %, Temperature -40.0 °C	27109 psi @Strain 2.46 %, Temperature -40.0 °F	50%RH; ISO 11403-1 -2
	193.42 MPa @Strain 2.84 %, Temperature -20.0 °C	28053 psi @Strain 2.84 %, Temperature -4.00 °F	DAM; ISO 11403-1 -2
	209.81 MPa @Strain 2.88 %, Temperature -40.0 °C	30430 psi @Strain 2.88 %, Temperature -40.0 °F	DAM; ISO 11403-1 -2
Elongation at Break	3.7 %	3.7 %	DAM; ISO 527-1/-2
	7.0 %	7.0 %	50%RH; ISO 527-1/-2
Tensile Modulus	6.20 GPa	899 ksi	50%RH; ISO 527-1/-2
	8.90 GPa	1290 ksi	DAM; ISO 527-1/-2
	1.83 GPa @Temperature 225 °C	265 ksi @Temperature 437 °F	DAM; Dynamic; ISO 11403-1 -2
	3.18 GPa @Temperature 145 °C	461 ksi @Temperature 293 °F	DAM; Dynamic; ISO 11403-1 -2
	3.578 GPa @Temperature 120 °C	518.9 ksi @Temperature 248 °F	50%RH; ISO 11403-1 -2
	4.215 GPa @Temperature 120 °C	611.3 ksi @Temperature 248 °F	DAM; ISO 11403-1 -2
	4.57 GPa @Temperature 85.0 °C	662 ksi @Temperature 185 °F	DAM; Dynamic; ISO 11403-1 -2
	5.636 GPa @Temperature 40.0 °C	817.4 ksi @Temperature 104 °F	50%RH; ISO 11403-1 -2
	7.4963 GPa @Temperature 55.0 °C	1087.2 ksi @Temperature 131 °F	DAM; Dynamic; ISO 11403-1 -2
	8.468 GPa @Temperature 15.0 °C	1228 ksi @Temperature 59.0 °F	DAM; Dynamic; ISO 11403-1 -2
	8.484 GPa @Temperature -10.0 °C	1231 ksi @Temperature 14.0 °F	DAM; Dynamic; ISO 11403-1 -2
	8.70 GPa @Temperature 40.0 °C	1260 ksi @Temperature 104 °F	DAM; ISO 11403-1 -2
	8.75 GPa @Temperature -35.0 °C	1270 ksi @Temperature -31.0 °F	DAM; Dynamic; ISO 11403-1 -2
	9.26 GPa @Temperature -50.0 °C	1340 ksi @Temperature -58.0 °F	DAM; Dynamic; ISO 11403-1 -2
	10.534 GPa @Temperature -40.0 °C	1527.8 ksi @Temperature -40.0 °F	DAM; ISO 11403-1 -2
	10.72 GPa @Temperature -40.0 °C	1555 ksi @Temperature -40.0 °F	50%RH; ISO 11403-1 -2
Flexural Modulus	6.20 GPa	899 ksi	50%RH; ISO 178
	7.50 GPa	1090 ksi	DAM; ISO 178
Shear Modulus	0.475 GPa @Temperature 160 °C	68.9 ksi @Temperature 320 °F	DAM; Dynamic; ISO 11403-1 -2
	0.555 GPa @Temperature 120 °C	80.5 ksi @Temperature 248 °F	DAM; Dynamic; ISO 11403-1 -2
	0.922 GPa @Temperature 70.0 °C	134 ksi @Temperature 158 °F	DAM; Dynamic; ISO 11403-1 -2
	1.46 GPa @Temperature 20.0 °C	212 ksi @Temperature 68.0 °F	DAM; Dynamic; ISO 11403-1 -2
	1.55 GPa @Temperature -20.0 °C	225 ksi @Temperature -4.00 °F	DAM; Dynamic; ISO 11403-1 -2
	1.85 GPa @Temperature -50.0 °C	268 ksi @Temperature -58.0 °F	DAM; Dynamic; ISO 11403-1 -2
Secant Modulus	2.14 GPa @Strain 4.78 %, Temperature 40.0 °C	311 ksi @Strain 4.78 %, Temperature 104 °F	50%RH; ISO 11403-1 -2
	2.52 GPa @Strain 4.91 %, Temperature 23.0 °C	366 ksi @Strain 4.91 %, Temperature 73.4 °F	50%RH; ISO 11403-1 -2
	3.41 GPa @Strain 2.53 %, Temperature 40.0 °C	495 ksi @Strain 2.53 %, Temperature 104 °F	50%RH; ISO 11403-1 -2
	4.20 GPa @Strain 2.66 %, Temperature 23.0 °C	609 ksi @Strain 2.66 %, Temperature 73.4 °F	50%RH; ISO 11403-1 -2
	4.97 GPa @Strain 1.03 %, Temperature 40.0 °C	720 ksi @Strain 1.03 %, Temperature 104 °F	50%RH; ISO 11403-1 -2
	5.0777 GPa @Strain 2.69 %, Temperature 40.0 °C	736.47 ksi @Strain 2.69 %, Temperature 104 °F	DAM; ISO 11403-1 -2
	5.13 GPa @Strain 3.64 %, Temperature 0.000 °C	744 ksi @Strain 3.64 %, Temperature 32.0 °F	DAM; ISO 11403-1 -2
	5.41 GPa @Strain 2.97 %, Temperature 23.0 °C	785 ksi @Strain 2.97 %, Temperature 73.4 °F	DAM; ISO 11403-1 -2
	5.71 GPa @Strain 2.52 %, Temperature 0.000 °C	828 ksi @Strain 2.52 %, Temperature 32.0 °F	50%RH; ISO 11403-1 -2
	5.83 GPa @Strain 1.31 %, Temperature 23.0 °C	846 ksi @Strain 1.31 %, Temperature 73.4 °F	50%RH; ISO 11403-1 -2
	5.8697 GPa @Strain 0.330 %, Temperature 40.0 °C	851.34 ksi @Strain 0.330 %, Temperature 104 °F	50%RH; ISO 11403-1 -2
	6.30 GPa @Strain 3.24 %, Temperature -20.0 °C	914 ksi @Strain 3.24 %, Temperature -4.00 °F	DAM; ISO 11403-1 -2
	6.55 GPa @Strain 3.24 %, Temperature -40.0 °C	950 ksi @Strain 3.24 %, Temperature -40.0 °F	50%RH; ISO 11403-1 -2
	6.73 GPa @Strain 3.34 %, Temperature -40.0 °C	976 ksi @Strain 3.34 %, Temperature -40.0 °F	DAM; ISO 11403-1 -2
	6.79 GPa @Strain 2.45 %, Temperature -20.0 °C	985 ksi @Strain 2.45 %, Temperature -4.00 °F	50%RH; ISO 11403-1 -2
	7.01 GPa @Strain 0.590 %, Temperature 23.0 °C	1020 ksi @Strain 0.590 %, Temperature 73.4 °F	50%RH; ISO 11403-1 -2
	7.45 GPa @Strain 1.35 %, Temperature 0.000 °C	1080 ksi @Strain 1.35 %, Temperature 32.0 °F	50%RH; ISO 11403-1 -2
	7.61 GPa @Strain 1.19 %, Temperature 40.0 °C	1100 ksi @Strain 1.19 %, Temperature 104 °F	DAM; ISO 11403-1 -2
	7.80 GPa @Strain 1.47 %, Temperature 23.0 °C	1130 ksi @Strain 1.47 %, Temperature 73.4 °F	DAM; ISO 11403-1 -2
	7.94 GPa @Strain 1.79 %, Temperature 0.000 °C	1150 ksi @Strain 1.79 %, Temperature 32.0 °F	DAM; ISO 11403-1 -2
	8.12 GPa @Strain 1.89 %, Temperature -20.0 °C	1180 ksi @Strain 1.89 %, Temperature -4.00 °F	DAM; ISO 11403-1 -2
	8.39 GPa @Strain 0.710 %, Temperature 0.000 °C	1220 ksi @Strain 0.710 %, Temperature 32.0 °F	50%RH; ISO 11403-1 -2
	8.45 GPa @Strain 1.84 %, Temperature -40.0 °C	1230 ksi @Strain 1.84 %, Temperature -40.0 °F	50%RH; ISO 11403-1 -2
	8.50 GPa @Strain 1.86 %, Temperature -40.0 °C	1230 ksi @Strain 1.86 %, Temperature -40.0 °F	DAM; ISO 11403-1 -2
	8.50 GPa @Strain 1.36 %, Temperature -20.0 °C	1230 ksi @Strain 1.36 %, Temperature -4.00 °F	50%RH; ISO 11403-1 -2
	8.79 GPa @Strain 0.510 %, Temperature 40.0 °C	1270 ksi @Strain 0.510 %, Temperature 104 °F	DAM; ISO 11403-1 -2
	9.08 GPa @Strain 0.760 %, Temperature 23.0 °C	1320 ksi @Strain 0.760 %, Temperature 73.4 °F	DAM; ISO 11403-1 -2
	9.13 GPa @Strain 1.16 %, Temperature -20.0 °C	1320 ksi @Strain 1.16 %, Temperature -4.00 °F	DAM; ISO 11403-1 -2
	9.25 GPa @Strain 0.980 %, Temperature 0.000 °C	1340 ksi @Strain 0.980 %, Temperature 32.0 °F	DAM; ISO 11403-1 -2
	9.35 GPa @Strain 1.07 %, Temperature -40.0 °C	1360 ksi @Strain 1.07 %, Temperature -40.0 °F	DAM; ISO 11403-1 -2
	9.46 GPa @Strain 0.740 %, Temperature -20.0 °C	1370 ksi @Strain 0.740 %, Temperature -4.00 °F	50%RH; ISO 11403-1 -2
	10.1 GPa @Strain 0.870 %, Temperature -40.0 °C	1470 ksi @Strain 0.870 %, Temperature -40.0 °F	50%RH; ISO 11403-1 -2
	11.3 GPa @Strain 0.310 %, Temperature -40.0 °C	1640 ksi @Strain 0.310 %, Temperature -40.0 °F	50%RH; ISO 11403-1 -2
Izod Impact, Notched (ISO)	21.0 kJ/m²	9.99 ft-lb/in²	DAM; ISO 180/1A
	26.0 kJ/m²	12.4 ft-lb/in²	50%RH; ISO 180/1A
	15.0 kJ/m² @Temperature -40.0 °C	7.14 ft-lb/in² @Temperature -40.0 °F	DAM; ISO 180/1A
	15.0 kJ/m² @Temperature -40.0 °C	7.14 ft-lb/in² @Temperature -40.0 °F	50%RH; ISO 180/1A
	16.0 kJ/m² @Temperature -30.0 °C	7.61 ft-lb/in² @Temperature -22.0 °F	50%RH; ISO 180/1A
	17.0 kJ/m² @Temperature -30.0 °C	8.09 ft-lb/in² @Temperature -22.0 °F	DAM; ISO 180/1A
Izod Impact, Unnotched (ISO)	80.0 kJ/m²	38.1 ft-lb/in²	DAM; ISO 180/1U
	80.0 kJ/m²	38.1 ft-lb/in²	50%RH; ISO 180/1U
	75.0 kJ/m² @Temperature -30.0 °C	35.7 ft-lb/in² @Temperature -22.0 °F	50%RH; ISO 180/1U
	80.0 kJ/m² @Temperature -30.0 °C	38.1 ft-lb/in² @Temperature -22.0 °F	DAM; ISO 180/1U
Charpy Impact Unnotched	9.70 J/cm²	46.2 ft-lb/in²	DAM; ISO 179/1eU
	9.80 J/cm²	46.6 ft-lb/in²	50%RH; ISO 179/1eU
	10.0 J/cm² @Temperature -30.0 °C	47.6 ft-lb/in² @Temperature -22.0 °F	50%RH; ISO 179/1eU
	10.6 J/cm² @Temperature -30.0 °C	50.4 ft-lb/in² @Temperature -22.0 °F	DAM; ISO 179/1eU
Charpy Impact, Notched	2.00 J/cm²	9.52 ft-lb/in²	DAM; ISO 179/1eA
	2.80 J/cm²	13.3 ft-lb/in²	50%RH; ISO 179/1eA
	1.40 J/cm² @Temperature -40.0 °C	6.66 ft-lb/in² @Temperature -40.0 °F	DAM; ISO 179/1eA
	1.70 J/cm² @Temperature -30.0 °C	8.09 ft-lb/in² @Temperature -22.0 °F	50%RH; ISO 179/1eA
	1.80 J/cm² @Temperature -40.0 °C	8.57 ft-lb/in² @Temperature -40.0 °F	50%RH; ISO 179/1eA
	1.80 J/cm² @Temperature -30.0 °C	8.57 ft-lb/in² @Temperature -22.0 °F	DAM; ISO 179/1eA
Tensile Creep Modulus, 1 hour	5300 MPa @Time 3600 sec	769000 psi @Time 1.00 hour	50%RH; ISO 899-1
Tensile Creep Modulus, 1000 hours	4300 MPa @Time 3.60e+6 sec	624000 psi @Time 1000 hour	50%RH; ISO 899-1

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+11 ohm-cm	1.00e+11 ohm-cm	50%RH; IEC 60093
	>= 1.00e+15 ohm-cm	>= 1.00e+15 ohm-cm	DAM; IEC 60093
Surface Resistance	1.00e+12 ohm	1.00e+12 ohm	50%RH; IEC 60093
Comparative Tracking Index	400 V	400 V	DAM; IEC 60112

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	15.0 µm/m-°C	8.33 µin/in-°F	DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow	119 µm/m-°C	66.1 µin/in-°F	DAM; ISO 11359-1/-2
	95.0 µm/m-°C @Temperature -40.0 °C	52.8 µin/in-°F @Temperature -40.0 °F	ISO 11403-1 -2
	95.0 µm/m-°C @Temperature 23.0 °C	52.8 µin/in-°F @Temperature 73.4 °F	ISO 11403-1 -2
Specific Heat Capacity	2.20 J/g-°C	0.526 BTU/lb-°F
Thermal Conductivity	0.220 W/m-K	1.53 BTU-in/hr-ft²-°F	of melt
Melting Point	262 °C	504 °F	DAM; 10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)	261 °C	502 °F	DAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	246 °C	475 °F	DAM; ISO 75-1/-2
Vicat Softening Point	245 °C	473 °F	DAM; 50°C/h 50N; ISO 306
Glass Transition Temp, Tg	75.0 °C	167 °F	DAM; 10°C/min; ISO 11357-1/-2
Flammability, UL94	HB @Thickness 1.50 mm	HB @Thickness 0.0591 in	DAM; IEC 60695-11-10
	HB @Thickness 0.800 mm	HB @Thickness 0.0315 in	DAM; IEC 60695-11-10

Descriptive Properties
Additives	Lubricants
	Release agent
Delivery form	Pellets
Eff. thermal diffusivity	1.03E-07 m²/s
Part Marking Code	>PA66-IGF33<	ISO 11469
Processing	Injection Moulding
Regional Availability	Asia Pacific
	Europe
	Global
	Near East/Africa
	North America
	South and Central America
Resin Identification	PA66-IGF33
Special characteristics	Heat stabilised or stable to heat
UL recognition	UL	DAM

概述

PA塑料(尼龍，聚酰胺)，英文名稱:Polyamide

PA的品種繁多，有PA6、PA66、PAll、PAl2、PA46、PA610、PA612、PAl010等，以及近幾年開發的半芳香族尼龍PA6T和特種尼龍等很多新品種。

物理性能

比重：PA6 1.14克/立方厘米，PA66 1.15克/立方厘米，PA1010 1.05克/立方厘米

成型收縮率：PA6 0.8-2.5% ，PA66 1.5-2.2%

成型溫度：220-300℃

干燥條件：100-110℃/12小時

堅韌、耐磨、耐油、,耐水、抗酶菌、但吸水大

燃燒鑒別方法：火焰上端黃色，下端藍色，燃燒后塑料熔滴落，起泡，離火后特殊的羊毛，指甲燒焦味和帶芹菜味

尼龍6：	彈性好，沖擊強度，吸水較大
尼龍66：	性能優于尼龍6，強度高，耐磨性好
尼龍610：	與尼龍66相似，但吸水小，剛度低
尼龍1010：	半透明，吸水小。耐寒性較好。適于制作一般機械零件、減磨耐磨零件、傳動零件以及化工、電器、儀表等零件

成型性能

1、結晶料，熔點較高，熔融溫度范圍窄，熱穩定性差，料溫超過300度、滯留時間超過30分鐘即分解。較易吸濕，需干燥，含水量不得超過0.3%。

2、流動性好，易溢料。宜用自鎖時噴嘴，并應加熱。

3、成型收縮范圍及收縮率大，方向性明顯，易發生縮孔、變形等。

4、模溫按塑件壁厚在20～90度范圍內選取，注射壓力按注射機類型、料溫、塑件形狀尺寸、模具澆注系統選定，成型周期按塑件壁厚選定。樹脂粘度小時，注射、冷卻時間應取長，并用白油作脫模劑。

5、模具澆注系統的形式和尺寸，增大流道和澆口尺寸可減少縮水。

聚酰胺的不足之處在于：由于熱膨脹和吸水性所至的尺寸精度不夠，耐酸性差，硬度和彈性模量不夠。經改良以后，也是比較優秀的工程塑料之一。

應用

汽車制造方面

用于制造燃料濾網、燃料過濾器、罐、捕集器、儲油槽、發動機汽缸蓋罩、散熱器水缸、平衡旋轉軸齒輪。也可用在汽車的電器配件、接線柱等。另外，它還可用作驅動、控制部件等。

電器電子工業

可用于制造電飯鍋、電動吸塵器、高頻電子食品加熱器，電器產品的接線柱、開關和電阻器等。

醫療器械儀器

用于醫用輸血管、取血器、輸液器等。PA單絲可做外科手術縫線、假發等；另外，電子打字機的數字旋轉盤、接線柱、傳動齒輪、印刷機的帶式過濾片等。

其它方面

用于制作一次性打火機體、堿性干電池襯墊，摩托車駕駛員的頭盔，辦公機器外殼，辦公用椅的角輪、座和靠背，冰鞋、釣魚線等，PA薄膜氣體阻隔性能優良，而且耐油性、耐低溫沖擊性、耐穿透性好，可用于肉、火腿腸等冷凍食品的包裝。聚酰胺還可棒材和板材，也作齒輪或其它傳動裝置。

上海浩銘塑膠有限公司！本公司承諾，所有產品都是原廠家，原包裝一線獨家營銷！

可提供以下報告：COA（產地證明）SGS（檢測報告）MSDS（成分報告）FDA（食品安全報告）UL黃卡（出口報告）正規發票！歡迎新老客戶來電咨詢：

聯系人：鄧小姐

聯系電話：13917657923

聯系QQ:996152797

聯系郵箱：996152797@qq.com

耐高溫 PA66/美國杜邦/80G33HS1L NC010

汽車制造方面

電器電子工業

醫療器械儀器

其它方面