久久se精品一区二区三区,亚洲精品视频免费,亚洲a免费,亚洲男人第一无码av网,亚洲AV日韩AV激情亚洲

Lehmann & Voss LUVOCOM? 1105/CF/10/GR/10/TF/10-2 PEEK, with carbon fiber, PTFE, lubricant modified

Lehmann & Voss LUVOCOM? 1105/CF/10/GR/10/TF/10-2 PEEK, with carbon fiber, PTFE, lubricant modified 物性表: Lehmann & Voss LUVOCOM? 1105/CF/10/GR/10/TF/10-2 PEEK, with carbon fiber, PTFE, lubricant modified物性表及特性介紹,Lehmann & Voss LUVOCOM? 1105/CF/10/GR/10/TF/10-2 PEEK, with carbon fiber, PTFE, lubricant modified注塑參數詳情,如需Lehmann & Voss LUVOCOM? 1105/CF/10/GR/10/TF/10-2 PEEK, with carbon fiber, PTFE, lubricant modified下載, 可到相關下載區下載

熔體流動速率 [g/10min]: 10.0
彎曲模量 [MPa]: 9.00

Physical Properties	Metric	English	Comments

Specific Gravity	1.44 g/cc	1.44 g/cc	ISO 1183
Water Absorption	<= 0.10 %	<= 0.10 %	23°C/24h
Linear Mold Shrinkage	0.0020 - 0.0050 cm/cm	0.0020 - 0.0050 in/in
Melt Flow	<= 10 g/10 min @Load 10.0 kg, Temperature 380 °C	<= 10 g/10 min @Load 22.0 lb, Temperature 716 °F

Mechanical Properties	Metric	English	Comments
Tensile Stress	155 MPa	22500 psi
Elongation at Yield	2.0 %	2.0 %
	3.0 %	3.0 %	flexural
Modulus of Elasticity	13.0 GPa	1890 ksi
Flexural Strength	210 MPa	30500 psi
Flexural Modulus	9.00 GPa	1310 ksi
Charpy Impact Unnotched	3.00 J/cm2	14.3 ft-lb/in2	flatwise; ISO 179 1fU
	2.50 J/cm2 @Temperature -30.0 °C	11.9 ft-lb/in2 @Temperature -22.0 °F	ISO 179
Charpy Impact, Notched	0.700 J/cm2	3.33 ft-lb/in2	ISO 179 1eA
	0.700 J/cm2 @Temperature -30.0 °C	3.33 ft-lb/in2 @Temperature -22.0 °F	ISO 179 eA
Coefficient of Friction, Dynamic	0.14	0.14
Coefficient of Friction, Static	0.12	0.12

Electrical Properties	Metric	English	Comments
Surface Resistance	<= 1.00e+7 ohm	<= 1.00e+7 ohm
Insulation Resistance	<= 1.00e+8 ohm	<= 1.00e+8 ohm

Thermal Properties	Metric	English	Comments
CTE, linear	30.0 μm/m-°C	16.7 μin/in-°F	DIN 53752
Thermal Conductivity	0.450 W/m-K	3.12 BTU-in/hr-ft2-°F	DIN 52612
Maximum Service Temperature, Air	250 °C	482 °F
	280 °C	536 °F	short term
Deflection Temperature at 1.8 MPa (264 psi)	260 °C	500 °F
Vicat Softening Point	300 °C	572 °F	DIN ISO 306
Flammability, UL94	V-0	V-0	not recognized by UL

Processing Properties	Metric	English	Comments
Processing Temperature	390 °C	734 °F	mass temp
Nozzle Temperature	360 - 380 °C	680 - 716 °F
Zone 1	360 - 370 °C	680 - 698 °F
Zone 2	380 - 390 °C	716 - 734 °F
Zone 3	390 - 400 °C	734 - 752 °F
Mold Temperature	170 - 200 °C	338 - 392 °F
Drying Temperature	120 °C @Time 21600 - 28800 sec	248 °F @Time 6.00 - 8.00 hour	or
	150 °C @Time 10800 - 21600 sec	302 °F @Time 3.00 - 6.00 hour	Dehumidifying dryer

Descriptive Properties
Color	natural color (black)

關鍵詞:
PEEK
供應
with carbon fiber
lubricant modified
PTFE
Lehmann & Voss LUVOCOM? 1105/CF/10/GR/10/TF/10-2 PEEK

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/yuanliaoku/show-50001.html

免責聲明: 本文 Lehmann & Voss LUVOCOM? 1105/CF/10/GR/10/TF/10-2 PEEK, with carbon fiber, PTFE, lubricant modified 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡