久久国产成人高清精品亚洲,欧美牲交a欧美牲交aⅴ一,国产又色又爽又黄的视频在线 ,国产激情无码一区二区三区,亚洲免费的福利片

Kraiburg TPE THERMOLAST? K TF5FMA Thermoplastic Elastomer, Adhesion to PC, ABS, PETG

Kraiburg TPE THERMOLAST? K TF5FMA Thermoplastic Elastomer, Adhesion to PC, ABS, PETG 物性表: Kraiburg TPE THERMOLAST? K TF5FMA Thermoplastic Elastomer, Adhesion to PC, ABS, PETG物性表及特性介紹,Kraiburg TPE THERMOLAST? K TF5FMA Thermoplastic Elastomer, Adhesion to PC, ABS, PETG注塑參數詳情,如需Kraiburg TPE THERMOLAST? K TF5FMA Thermoplastic Elastomer, Adhesion to PC, ABS, PETG下載, 可到相關下載區下載

密度 [g/cm3]: 1.1

Physical Properties	Metric	English	Comments

Density	1.10 g/cc	0.0397 lb/in3	DIN EN ISO 1183-1:2004

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	50	50	DIN 53505 / ISO 868
Tensile Strength at Break	2.70 MPa	392 psi	Deviating from ISO 37 standard test piece is tested with a traverse speed of 200 mm/min; DIN 53504 / ISO 37
Elongation at Break	590 %	590 %	Deviating from ISO 37 standard test piece is tested with a traverse speed of 200 mm/min; DIN 53504 / ISO 37
Peel Strength	2.00 kN/m	11.4 pli	to PBT; Renault test D41 1916
	2.50 kN/m	14.3 pli	to PETG; Renault test D41 1916
	3.50 kN/m	20.0 pli	to ABS; Renault test D41 1916
	5.00 kN/m	28.5 pli	to PC; Renault test D41 1916
Graves Tear Strength	14.0 kN/m	79.9 pli	DIN ISO 34-1 Method B (b)

Thermal Properties	Metric	English	Comments
Maximum Service Temperature, Air	80.0 °C	176 °F
Minimum Service Temperature, Air	-40.0 °C	-40.0 °F

Processing Properties	Metric	English	Comments
Processing Temperature	200 - 250 °C	392 - 482 °F
Drying Temperature	80.0 °C @Time 7200 sec	176 °F @Time 2.00 hour	Pre drying

Descriptive Properties
Color	Natural

關鍵詞:
TPE
供應
Adhesion to PC
ABS
PETG
Kraiburg TPE THERMOLAST? K TF5FMA Thermoplastic Elastomer

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/yuanliaoku/show-48779.html

免責聲明: 本文 Kraiburg TPE THERMOLAST? K TF5FMA Thermoplastic Elastomer, Adhesion to PC, ABS, PETG 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡