免费看黄片一区二区三区,思思久99久女女精品,少妇私密会所按摩到高潮呻吟,成人看的污污超级黄网站免费,久国产精品韩国三级视频

Kraiburg TPE THERMOLAST? K TP6VCZ Thermoplastic Elastomer, Adhesion to PC, ABS, PETG, optimised comp

Kraiburg TPE THERMOLAST? K TP6VCZ Thermoplastic Elastomer, Adhesion to PC, ABS, PETG, optimised comp 物性表: Kraiburg TPE THERMOLAST? K TP6VCZ Thermoplastic Elastomer, Adhesion to PC, ABS, PETG, optimised comp物性表及特性介紹,Kraiburg TPE THERMOLAST? K TP6VCZ Thermoplastic Elastomer, Adhesion to PC, ABS, PETG, optimised comp注塑參數詳情,如需Kraiburg TPE THERMOLAST? K TP6VCZ Thermoplastic Elastomer, Adhesion to PC, ABS, PETG, optimised comp下載, 可到相關下載區下載

密度 [g/cm3]: 1.1

Physical Properties	Metric	English	Comments

Density	1.10 g/cc	0.0397 lb/in3	DIN EN ISO 1183-1:2004

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	60	60	DIN 53505 / ISO 868
Tensile Strength at Break	5.50 MPa	798 psi	Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min; DIN 53504 / ISO 37
Elongation at Break	530 %	530 %	Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min; DIN 53504 / ISO 37
Peel Strength	5.00 - 10.0 kN/m	28.5 - 57.1 pli	to ABS, depending on the hardness; Renault test D41 1916
	6.00 - 18.0 kN/m	34.2 - 103 pli	to PC/ABS, depending on the hardness; Renault test D41 1916
	7.00 - 18.0 kN/m	39.9 - 103 pli	to PC, depending on the hardness; Renault test D41 1916
Graves Tear Strength	14.0 kN/m	79.9 pli	DIN ISO 34-1 Method B (b)
Compression Set	15 % @Temperature 23.0 °C, Time 259000 sec	15 % @Temperature 73.4 °F, Time 72.0 hour	ISO 815
	44 % @Temperature 70.0 °C, Time 79200 sec	44 % @Temperature 158 °F, Time 22.0 hour	ISO 815
	68 % @Temperature 120 °C, Time 79200 sec	68 % @Temperature 248 °F, Time 22.0 hour	ISO 815

Thermal Properties	Metric	English	Comments
Flammability, UL94	HB	HB

Processing Properties	Metric	English	Comments
Mold Temperature	40.0 - 60.0 °C	104 - 140 °F
Drying Temperature	60.0 - 80.0 °C @Time 7200 - 14400 sec	140 - 176 °F @Time 2.00 - 4.00 hour	Pre drying

Descriptive Properties
Color	Black

關鍵詞:
TPE
供應
Adhesion to PC
ABS
PETG
optimised comp
Kraiburg TPE THERMOLAST? K TP6VCZ Thermoplastic Elastomer

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/yuanliaoku/show-48683.html

免責聲明: 本文 Kraiburg TPE THERMOLAST? K TP6VCZ Thermoplastic Elastomer, Adhesion to PC, ABS, PETG, optimised comp 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡