- 密度 [g/cm3]: 1.11
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.11 g/cc | 0.0401 lb/in3 | DIN 53479 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore A | 80 | 80 | DIN 53505 | ||
| Tensile Strength at Break | 12.0 MPa | 1740 psi | DIN 53504 | ||
| Elongation at Break | 710 % | 710 % | DIN 53504 | ||
| Tear Strength | 25.0 kN/m | 143 pli | DIN 53515 | ||
| Taber Abrasion, mg/1000 Cycles | 190 | 190 | mm3; DIN 53516 | ||
| Compression Set | 30 % | 30 % | 72 hours at 23°C; ISO 815 | ||
| 75 % | 75 % | 24 hours at -25°C; ISO 815 | |||
| 50 % @Temperature 70.0 °C | 50 % @Temperature 158 °F | 24 hours; ISO 815 | |||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | >= 1.00e+12 ohm-cm | >= 1.00e+12 ohm-cm | DIN 53482 | ||
| Dielectric Constant | 2.7 @Frequency 1e+6 Hz | 2.7 @Frequency 1e+6 Hz | DIN 53483 | ||
| Dielectric Strength | 34.0 kV/mm | 864 kV/in | DIN 53481 | ||
| Dissipation Factor | 0.0051 @Frequency 1e+6 Hz | 0.0051 @Frequency 1e+6 Hz | DIN 53483 | ||
| Comparative Tracking Index | >= 550 V | >= 550 V | DIN IEC112 | ||
| Thermal Properties | Metric | English | Comments | ||
| Maximum Service Temperature, Air | 80.0 °C | 176 °F | |||
| Minimum Service Temperature, Air | -40.0 °C | -40.0 °F | |||
| Processing Properties | Metric | English | Comments | ||
| Processing Temperature | 160 - 180 °C | 320 - 356 °F | |||
| Descriptive Properties | |||||
| Color | Black | ||||
| Compression Ratio | 3.5:1 | ||||
Materials flagged as discontinued () are no longer part of the manufacturer’s standard product line according to our latest information. These materials may be available by special order, in distribution inventory, or reinstated as an active product. Data sheets from materials that are no longer available remain in MatWeb to assist users in finding replacement materials.
Users of our Advanced Search (registration required) may exclude discontinued materials from search results.