- 拉伸強度 [MPa]: 15.2
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.950 g/cc | 0.950 g/cc | ASTM D792 |
| Linear Mold Shrinkage | 0.0103 cm/cm | 0.0103 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore D | 31 | 31 | 10 Sec; ASTM D2240 |
| Tensile Strength, Yield | 15.2 MPa | 2200 psi | Method A (Dumbbell & Section), 20 in/min, Break; ASTM D412 |
| 9.65 MPa @Strain 300 % | 1400 psi @Strain 300 % | Method A (Dumbbell & Section), 20 in/min; ASTM D412 | |
| Elongation at Break | 550 % | 550 % | Method A (Dumbbell & Section), 20 in/min; ASTM D412 |
| Tear Strength | 75.4 kN/m | 430 pli | Die C (graves), 20 in/min; ASTM D624 |
| Compression Set | 32 % | 32 % | Method B, 73°F(23°C), 22 hrs; ASTM D395 |