- 密度 [g/cm3]: 1.53
- 吸水率 [%]: 1.9
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.53 g/cc | 0.0553 lb/in3 | ISO 1183 | ||
| Water Absorption | 1.9 % | 1.9 % | ISO 62 | ||
| Moisture Absorption | 0.800 % | 0.800 % | ISO 62 | ||
| Linear Mold Shrinkage, Flow | 0.0010 cm/cm | 0.0010 in/in | ISO 294-4, 2577 | ||
| Linear Mold Shrinkage, Transverse | 0.0070 cm/cm | 0.0070 in/in | ISO 294-4, 2577 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Ball Indentation Hardness | 165 MPa | 23900 psi | conditioned; ISO 2039-1 | ||
| 225 MPa | 32600 psi | dry; ISO 2039-1 | |||
| Tensile Strength at Break | 165 MPa | 23900 psi | conditioned; ISO 527-1/-2 | ||
| 210 MPa | 30500 psi | dry; ISO 527-1/-2 | |||
| Elongation at Break | 4.0 % | 4.0 % | dry; ISO 527-1/-2 | ||
| 5.5 % | 5.5 % | conditioned; ISO 527-1/-2 | |||
| Tensile Modulus | 12.0 GPa | 1740 ksi | conditioned; ISO 527-1/-2 | ||
| 15.5 GPa | 2250 ksi | dry; ISO 527-1/-2 | |||
| Charpy Impact Unnotched | 9.00 J/cm2 | 42.8 ft-lb/in2 | conditioned; ISO 179/1eU | ||
| 9.50 J/cm2 | 45.2 ft-lb/in2 | dry; ISO 179/1eU | |||
| 9.00 J/cm2 @Temperature 30.0 °C | 42.8 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| 9.50 J/cm2 @Temperature 30.0 °C | 45.2 ft-lb/in2 @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| Charpy Impact, Notched | 1.70 J/cm2 | 8.09 ft-lb/in2 | dry; ISO 179/1eA | ||
| 2.00 J/cm2 | 9.52 ft-lb/in2 | conditioned; ISO 179/1eA | |||
| 1.40 J/cm2 @Temperature 30.0 °C | 6.66 ft-lb/in2 @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| 1.40 J/cm2 @Temperature 30.0 °C | 6.66 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | dry; IEC 60093 | ||
| 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | conditioned; IEC 60093 | |||
| Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | IEC 60093 | ||
| Dielectric Strength | 41.0 kV/mm | 1040 kV/in | conditioned; IEC 60243-1 | ||
| 42.0 kV/mm | 1070 kV/in | dry; IEC 60243-1 | |||
| Comparative Tracking Index | 600 V | 600 V | conditioned; IEC 60112 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 20.0 μm/m-°C | 11.1 μin/in-°F | ISO 11359-1/-2 | ||
| CTE, linear, Transverse to Flow | 80.0 μm/m-°C | 44.4 μin/in-°F | ISO 11359-1/-2 | ||
| Melting Point | 225 °C | 437 °F | 10°C/min; ISO 11357-1/-3 | ||
| Maximum Service Temperature, Air | 100 - 130 °C | 212 - 266 °F | long term; EMS | ||
| 160 °C | 320 °F | short term; EMS | |||
| Deflection Temperature at 1.8 MPa (264 psi) | 200 °C | 392 °F | ISO 75-1/-2 | ||
| Deflection Temperature at 8.0 MPa | 150 °C | 302 °F | ISO 75-1/-2 | ||
| Flammability, UL94 | HB | HB | IEC 60695-11-10 | ||
| Descriptive Properties | |||||
| Automotive | Air intake sytems | ||||
| Automotive electr. and electronics, lighting | |||||
| Compressed air systems | |||||
| Cooling and climate control | |||||
| Exterior | |||||
| Fuel systems | |||||
| Hydraulic systems | |||||
| Interior | |||||
| Powertrain and Chassis | |||||
| Electricals & Electronics | Connectors | ||||
| Electrical appliances | |||||
| Electrical equipment | |||||
| Lighting | |||||
| Mobile phones and other portable devices | |||||
| Form | Granules | ||||
| Industry & Consumer goods | Housewares | ||||
| Hydraulics & Pneumatics | |||||
| Mechanical Engineering | |||||
| Power transmission | |||||
| Sports & Leisure | |||||
| Tools & Accessories | |||||
| Processing | Injection Molding | ||||
| Product Attributes | Bio based Polyamide | ||||
| Special Characteristics | Improved heat resistance | ||||
| Improved UV resistance (outdoor use) | |||||
| Light stabilized or stable to light | |||||