思思热在线视频精品,男人j进入女人j内部免费网站,性色在线视频精品,国产AV大陆精品一区二区三区,亚洲人成在久久综合网站

UBE UBESTA? 3030U Nylon 12 (After Oil (ASTM D471 No. 1) for 500 hours)

UBE UBESTA? 3030U Nylon 12 (After Oil (ASTM D471 No. 1) for 500 hours) 物性表: UBE UBESTA? 3030U Nylon 12 (After Oil (ASTM D471 No. 1) for 500 hours)物性表及特性介紹,UBE UBESTA? 3030U Nylon 12 (After Oil (ASTM D471 No. 1) for 500 hours)注塑參數詳情,如需UBE UBESTA? 3030U Nylon 12 (After Oil (ASTM D471 No. 1) for 500 hours)下載, 可到相關下載區下載

拉伸強度 [MPa]: 44.9

Mechanical Properties	Metric	English	Comments

Tensile Strength at Break	49.3 MPa	7150 psi	98% Ret.
Tensile Strength, Yield	44.9 MPa	6510 psi	107% Ret.
Elongation at Break	84 %	84 %	105% Ret.

Processing Properties	Metric	English	Comments
Processing Temperature	230 °C	446 °F	Flange Temperature for T-Die Cast Film Extrusion
Zone 1	190 °C	374 °F	For T-Die Cast Film Extrusion
	230 °C	446 °F	For 8x1 mm Tube Extrusion
Zone 2	210 °C	410 °F	For T-Die Cast Film Extrusion
	225 °C	437 °F	For 8x1 mm Tube Extrusion
Zone 3	220 °C	428 °F	For 8x1 mm Tube Extrusion
	230 °C	446 °F	For T-Die Cast Film Extrusion
Zone 4	215 °C	419 °F	For 8x1 mm Tube Extrusion
Die Temperature	230 °C	446 °F	For T-Die Cast Film Extrusion
Die Opening	0.0400 cm	0.0157 in	For T-Die Cast Film Extrusion
Roll Temperature	50.0 °C	122 °F	Chill Roll Temperature for T-Die Cast Film Extrusion
Drying Temperature	80.0 °C	176 °F	Option 1
	100 °C	212 °F	Option 2
	110 °C	230 °F	Option 3
Dry Time	2 - 4 hour	2 - 4 hour	Option 3
	4 - 6 hour	4 - 6 hour	Option 2
	6 - 8 hour	6 - 8 hour	Option 1
Screw Speed	15 - 76 rpm	15 - 76 rpm	For 8x1 mm Tube Extrusion

Descriptive Properties
C/R	3-3.5:1		For 8x1 mm Tube Extrusion
Calibrating Vacuum	100 mbar		For 8x1 mm Tube Extrusion
Calibration	9.95 mm		For 8x1 mm Tube Extrusion
Compression Ratio	min 3:1		For 8x1 mm Tube Extrusion
Die Diameter	16 mm		For 8x1 mm Tube Extrusion
Die Width	300 mm		For T-Die Cast Film Extrusion
Extruder	Barmag, Screw Diameter = 30 mm		For T-Die Cast Film Extrusion
Extruder Characteristics	65 mm screw diameter		For 8x1 mm Tube Extrusion
Film Thickness	60 microns		For T-Die Cast Film Extrusion
Haul Off Speed	5 m/min		For T-Die Cast Film Extrusion
Haul Speed	10-55 m/min		For 8x1 mm Tube Extrusion
L/D Ratio	25:1		For 8x1 mm Tube Extrusion
Length of Compression Zone	30% of screw length		For 8x1 mm Tube Extrusion
Length of Feeding Zone	30-40% of screw length		For 8x1 mm Tube Extrusion
Length of Metering Zone	30-45% of screw length		For 8x1 mm Tube Extrusion
Mandrel Diameter	12 mm		For 8x1 mm Tube Extrusion
Tensile Work To Break	860 kJ/m²		106% Ret.
Water Temperature	10-18°C		For 8x1 mm Tube Extrusion

關鍵詞:
供應
PA12
UBE UBESTA? 3030U Nylon 12 (After Oil (ASTM D471 No. 1) for 500 hours)

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/yuanliaoku/show-47256.html

免責聲明: 本文 UBE UBESTA? 3030U Nylon 12 (After Oil (ASTM D471 No. 1) for 500 hours) 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡