- 密度 [g/cm3]: 1.32
- 吸水率 [%]: 1.5
- 熱變形溫度 [℃]: 135.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.32 g/cc | 0.0477 lb/in3 | ISO 1183 | ||
| Water Absorption | 1.5 % | 1.5 % | ISO 62 | ||
| Moisture Absorption | 0.800 % | 0.800 % | ISO 62 | ||
| Linear Mold Shrinkage, Flow | 0.0010 cm/cm | 0.0010 in/in | ISO 294-4, 2577 | ||
| Linear Mold Shrinkage, Transverse | 0.0040 cm/cm | 0.0040 in/in | ISO 294-4, 2577 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Ball Indentation Hardness | 160 MPa | 23200 psi | conditioned; ISO 2039-1 | ||
| Tensile Strength at Break | 130 MPa | 18900 psi | conditioned; ISO 527-1/-2 | ||
| 140 MPa | 20300 psi | dry; ISO 527-1/-2 | |||
| Elongation at Break | 2.0 % | 2.0 % | dry; ISO 527-1/-2 | ||
| 2.0 % | 2.0 % | conditioned; ISO 527-1/-2 | |||
| Tensile Modulus | 9.00 GPa | 1310 ksi | conditioned; ISO 527-1/-2 | ||
| 9.00 GPa | 1310 ksi | dry; ISO 527-1/-2 | |||
| Charpy Impact Unnotched | 4.50 J/cm2 | 21.4 ft-lb/in2 | conditioned; ISO 179/1eU | ||
| 4.50 J/cm2 @Temperature 30.0 °C | 21.4 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| Charpy Impact, Notched | 1.40 J/cm2 | 6.66 ft-lb/in2 | conditioned; ISO 179/1eA | ||
| 1.30 J/cm2 @Temperature 30.0 °C | 6.19 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | conditioned; IEC 60093 | ||
| Surface Resistance | 1.00e+12 ohm | 1.00e+12 ohm | IEC 60093 | ||
| Dielectric Strength | 27.0 kV/mm | 686 kV/in | conditioned; IEC 60243-1 | ||
| Comparative Tracking Index | 600 V | 600 V | conditioned; IEC 60112 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 20.0 μm/m-°C | 11.1 μin/in-°F | ISO 11359-1/-2 | ||
| CTE, linear, Transverse to Flow | 80.0 μm/m-°C | 44.4 μin/in-°F | ISO 11359-1/-2 | ||
| Maximum Service Temperature, Air | 80.0 - 110 °C | 176 - 230 °F | long term; EMS | ||
| 125 °C | 257 °F | short term; EMS | |||
| Transformation Temperature, Tg | 155 °C | 311 °F | 10°C/min; ISO 11357-1/-2 | ||
| Deflection Temperature at 0.46 MPa (66 psi) | 135 °C | 275 °F | ISO 75-1/-2 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 125 °C | 257 °F | ISO 75-1/-2 | ||
| Flammability, UL94 | HB | HB | IEC 60695-11-10 | ||
| Descriptive Properties | |||||
| Automotive | Automotive electr. and electronics, lighting | ||||
| Cooling and climate control | |||||
| Powertrain and Chassis | |||||
| Electricals & Electronics | Electrical appliances | ||||
| Electrical equipment | |||||
| Energy distribution | |||||
| Mobile phones and other portable devices | |||||
| Form | Granules | ||||
| Industry & Consumer goods | Heating systems | ||||
| Housewares | |||||
| Hydraulics & Pneumatics | |||||
| Mechanical Engineering | |||||
| Medical devices | |||||
| Power transmission | |||||
| Tools & Accessories | |||||
| Processing | Injection Molding | ||||
| Water Contact | NSF 61 | ||||