- 密度 [g/cm3]: 1.08
- 吸水率 [%]: 1.5
- 拉伸強度 [MPa]: 45.0
- 熱變形溫度 [℃]: 140.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.08 g/cc | 0.0390 lb/in3 | ISO 1183 | ||
| Water Absorption | 1.5 % | 1.5 % | ISO 62 | ||
| Moisture Absorption | 0.700 % | 0.700 % | ISO 62 | ||
| Linear Mold Shrinkage, Flow | 0.0040 cm/cm | 0.0040 in/in | ISO 294-4, 2577 | ||
| Linear Mold Shrinkage, Transverse | 0.0060 cm/cm | 0.0060 in/in | ISO 294-4, 2577 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore D | 72 | 72 | conditioned, 15s; ISO 868 | ||
| Tensile Strength at Break | 40.0 MPa | 5800 psi | dry; ISO 527-1/-2 | ||
| 40.0 MPa | 5800 psi | conditioned; ISO 527-1/-2 | |||
| Tensile Strength, Yield | 45.0 MPa | 6530 psi | dry; ISO 527-1/-2 | ||
| 50.0 MPa | 7250 psi | dry; ISO 527-1/-2 | |||
| Elongation at Break | 40 % | 40 % | conditioned; ISO 527-1/-2 | ||
| 40 % | 40 % | dry; ISO 527-1/-2 | |||
| Elongation at Yield | 10 % | 10 % | dry; ISO 527-1/-2 | ||
| 12 % | 12 % | conditioned; ISO 527-1/-2 | |||
| Tensile Modulus | 2.00 GPa | 290 ksi | conditioned; ISO 527-1/-2 | ||
| 2.20 GPa | 319 ksi | dry; ISO 527-1/-2 | |||
| Charpy Impact Unnotched | NB | NB | dry; ISO 179/1eU | ||
| NB | NB | conditioned; ISO 179/1eU | |||
| NB @Temperature 30.0 °C | NB @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| NB @Temperature 30.0 °C | NB @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| Charpy Impact, Notched | 0.400 J/cm2 | 1.90 ft-lb/in2 | conditioned; ISO 179/1eA | ||
| 0.300 J/cm2 @Temperature 30.0 °C | 1.43 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | conditioned; IEC 60093 | ||
| Surface Resistance | 1.00e+12 ohm | 1.00e+12 ohm | IEC 60093 | ||
| Dielectric Strength | 21.0 kV/mm | 533 kV/in | conditioned; IEC 60243-1 | ||
| Comparative Tracking Index | 225 V | 225 V | conditioned; IEC 60112 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 80.0 μm/m-°C | 44.4 μin/in-°F | ISO 11359-1/-2 | ||
| CTE, linear, Transverse to Flow | 130 μm/m-°C | 72.2 μin/in-°F | ISO 11359-1/-2 | ||
| Melting Point | 178 °C | 352 °F | 10°C/min; ISO 11357-1/-3 | ||
| Maximum Service Temperature, Air | 90.0 - 110 °C | 194 - 230 °F | long term; EMS | ||
| 150 °C | 302 °F | short term; EMS | |||
| Deflection Temperature at 0.46 MPa (66 psi) | 140 °C | 284 °F | ISO 75-1/-2 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 65.0 °C | 149 °F | ISO 75-1/-2 | ||
| Flammability, UL94 | HB | HB | IEC 60695-11-10 | ||
| Descriptive Properties | |||||
| Automotive | Powertrain and Chassis | ||||
| Electricals & Electronics | Cables & Tubes | ||||
| Electrical appliances | |||||
| Form | Granules | ||||
| Industry & Consumer goods | Housewares | ||||
| Hydraulics & Pneumatics | |||||
| Mechanical Engineering | |||||
| Power transmission | |||||
| Sports & Leisure | |||||
| Tools & Accessories | |||||
| Processing | Injection Molding | ||||
| Other Extrusion | |||||
| Product Attributes | Improved friction & wear properties | ||||
| Special Characteristics | Improved heat resistance | ||||
| Improved UV resistance (outdoor use) | |||||
| Light stabilized or stable to light | |||||