成人AV专区精品无码国产,天堂a无码a无线孕交,日本另类αv欧美另类aⅴ,久久香蕉国产线看观看亚洲片,caoporn免费视频公开

DSM Akulon? Ultraflow? K-FG0 Nylon 6-50% Glass Reinforced (European and Asian Grade) (Dry)

DSM Akulon? Ultraflow? K-FG0 Nylon 6-50% Glass Reinforced (European and Asian Grade) (Dry) 物性表: DSM Akulon? Ultraflow? K-FG0 Nylon 6-50% Glass Reinforced (European and Asian Grade) (Dry)物性表及特性介紹,DSM Akulon? Ultraflow? K-FG0 Nylon 6-50% Glass Reinforced (European and Asian Grade) (Dry)注塑參數詳情,如需DSM Akulon? Ultraflow? K-FG0 Nylon 6-50% Glass Reinforced (European and Asian Grade) (Dry)下載, 可到相關下載區下載

密度 [g/cm3]: 1.56
吸水率 [%]: 4.5
彎曲模量 [MPa]: 14.0
熱變形溫度 [℃]: 220.0

Physical Properties	Metric	English	Comments

Density	1.56 g/cc	0.0564 lb/in3	ISO 1183
Water Absorption	4.5 %	4.5 %	Sim. to ISO 62
Moisture Absorption at Equilibrium	1.4 %	1.4 %	Humidity Absorption; Sim. to ISO 62
Linear Mold Shrinkage, Flow	0.0020 cm/cm	0.0020 in/in	Parallel; ISO 294-4
Linear Mold Shrinkage, Transverse	0.0090 cm/cm	0.0090 in/in	Normal; ISO 294-4

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	230 MPa	33400 psi	ISO 527-1/-2
Elongation at Break	2.5 %	2.5 %	ISO 527-1/-2
Tensile Modulus	16.5 GPa	2390 ksi	ISO 527-1/-2
Flexural Strength	350 MPa	50800 psi	ISO 178
Flexural Modulus	14.0 GPa	2030 ksi	ISO 178
Charpy Impact Unnotched	8.50 J/cm2 @Temperature -30.0 °C	40.5 ft-lb/in2 @Temperature -22.0 °F	ISO 179/1eU
	9.00 J/cm2 @Temperature 23.0 °C	42.8 ft-lb/in2 @Temperature 73.4 °F	ISO 179/1eU
Charpy Impact, Notched	1.20 J/cm2 @Temperature -30.0 °C	5.71 ft-lb/in2 @Temperature -22.0 °F	ISO 179/1eA
	1.50 J/cm2 @Temperature 23.0 °C	7.14 ft-lb/in2 @Temperature 73.4 °F	ISO 179/1eA

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+15 ohm-cm	1.00e+15 ohm-cm	IEC 60093
Dielectric Constant	3.5 @Frequency 100 Hz	3.5 @Frequency 100 Hz	IEC 60250
	5.2 @Frequency 1e+6 Hz	5.2 @Frequency 1e+6 Hz	IEC 60250
Dissipation Factor	0.0050 @Frequency 100 Hz	0.0050 @Frequency 100 Hz	IEC 60250
	0.015 @Frequency 1e+6 Hz	0.015 @Frequency 1e+6 Hz	IEC 60250
Comparative Tracking Index	600 V	600 V	IEC 60112

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	10.0 μm/m-°C @Temperature 20.0 °C	5.56 μin/in-°F @Temperature 68.0 °F	ISO 11359-1/-2
CTE, linear, Transverse to Flow	50.0 μm/m-°C @Temperature 20.0 °C	27.8 μin/in-°F @Temperature 68.0 °F	ISO 11359-1/-2
Melting Point	220 °C	428 °F	10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)	220 °C	428 °F	ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	210 °C	410 °F	ISO 75-1/-2
Flammability, UL94	HB @Thickness 1.60 mm	HB @Thickness 0.0630 in	IEC 60695-11-10

Descriptive Properties
Injection Molding	Yes
With Fillers	Yes

關鍵詞:
供應
PA6
DSM Akulon? Ultraflow? K-FG0 Nylon 6-50% Glass Reinforced (European and Asian Grade) (Dry)

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/yuanliaoku/show-46684.html

免責聲明: 本文 DSM Akulon? Ultraflow? K-FG0 Nylon 6-50% Glass Reinforced (European and Asian Grade) (Dry) 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡